User Manual

WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
100
7.4.17.2 ibsysstat Options
7.4.17.3 Multiple CA/Multiple Port Support
When no IB device or port is specified, the port to use is selected by the following criteria:
1. The first port that is ACTIVE.
Table 34 - ibsysstat Flags and Options
Flags Description
ping Verifies connectivity to server (default)
host Obtains host information from server
cpu Obtains cpu information from server
-o, --oui Uses specified OUI number to multiplex vendor
mads
-S, --Server Starts in server mode (do not return)
Debugging Flags Description
NOTE: Most OpenIB diagnostics take the following common flags. The exact list of sup-
ported flags per utility can be found in the usage message and can be shown using the
util_name -h syntax.
-d Raises the IB debugging level.
Can be used several times (-ddd or -d -d -d).
-e Shows send and receive errors (timeouts and oth-
ers)
-h Shows the usage message
-v Increases the application verbosity level.
Can be used several times (-vv or -v -v -v).
-v Shows the version info.
Addressing Flags Description
-G Uses GUID address argument. In most cases, it is
the Port GUID.
Example:
"0x08f1040023"
-s <smlid> Uses ’smlid’ as the target lid for SM/SA queries.
Other Common Flags Description
-C <ca_name> Uses the specified ca_name.
-P <ca_port> Uses the specified ca_port.
-t <timeout_ms> Overrides the default timeout for the solicited
mads.