User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
102
7.4.18.1 perfquery Synopsis
7.4.18.2 perfquery Options
perfquery [-d(ebug)] [-G(uid)] [-x|--extended] [-X|--xmtsl]
[-S|--rcvsl] [-D|--xmtdisc] [-E|--rcverr]
[-T|--extended_speeds][--oprcvcounters] [--flowctlcounters] [--vlop-
packets] [--vlopdata] [--vlxmitflowctlerrors] [--vlxmit-
counters]
[--swportvlcong] [--rcvcc] [--slrcvfecn] [--slrcvbecn] [--xmitcc]
[--vlxmittimecc] [-c|--smplctl] [-a(ll_ports)] [-l(oop_ports)]
[-r(eset_after_read)] [-R(eset_only)] [-C ca_name] [-P ca_port]
[-t(imeout) timeout_ms] [-V(ersion)] [-h(elp)] [<lid|guid> [[port]
[reset_mask]]]
Table 35 - perfquery Flags and Options
Flags Description
-x, --extended Shows extended port counters rather than
(basic) port counters.
Note that extended port counters attribute
is optional.
-X, --xmtsl Shows transmit data SL counter. This is an
optional counter for QoS.
-S, --rcvsl Shows receive data SL counter. This is an
optional counter for QoS.
-D, --xmtdisc Shows transmit discard details. This is an
optional counter.
-E, --rcverr Shows receive error details. This is an
optional counter.
-D, --xmtdisc Shows transmit discard details. This is an
optional counter.
-T, --extended_speeds Shows extended speeds port counters.
This is an optional counter.
--oprcvcounters Shows Rcv Counters per Op code. This is
an optional counter.
--flowctlcounters Shows flow control counters. This is an
optional counter.
--vloppackets Shows packets received per Op code per
VL. This is an optional counter.
--vlopdata Show data received per Op code per VL.
This is an optional counter.
--vlxmitflowctlerrors Shows flow control update errors per VL.
This is an optional counter.