User Manual

WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
106
7.4.20 smpdump
smpdump is a general purpose SMP utility which gets SM attributes from a specified SMA. The
result is dumped in hex by default.
-C <ca_name> Uses the specified ca_name.
-P <ca_port> Uses the specified ca_port.
--smkey <val> Uses SM_Key value for the query. Will be
used only with "trusted" queries. If non-
numeric value (like’x’) is specified then
saquery will prompt for a value.
-t, -timeout <msec> Specifies SA query response timeout in
milliseconds. Default is 100 milliseconds.
You may want to use this option if
IB_TIMEOUT is indicated.
--node-name-map <node-name-map> Specifies a node name map.The node name
map file maps GUIDs to more user friendly
names. See ibnetdiscover(8) for node name
map file format.Only used with the -O and
-U options.
• Supported query names (and aliases):
ClassPortInfo (CPI)
NodeRecord (NR) [lid]
PortInfoRecord (PIR) [[lid]/[port]/
[options]]
SL2VLTableRecord (SL2VL) [[lid]/
[in_port]/[out_port]]
PKeyTableRecord (PKTR) [[lid]/[port]/
[block]]
VLArbitrationTableRecord (VLAR)
[[lid]/[port]/[block]]
InformInfoRecord (IIR)
LinkRecord (LR) [[from_lid]/
[from_port]] [[to_lid]/[to_port]]
ServiceRecord (SR)
PathRecord (PR)
MCMemberRecord (MCMR)
LFTRecord (LFTR) [[lid]/[block]]
MFTRecord (MFTR) [[mlid]/
[position]/[block]]
GUIDInfoRecord (GIR) [[lid]/[block]]
-d enables debugging.
-h Shows help.
Table 36 - saquery Flags and Options
Flags Description