User Manual

WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
16
2.2.2 Running an Example Test - ib_send_bandwidth
Step 1. Start the server first:
Step 2. Start the client:
2.2.3 Using an ND Test
Step 1. Start the server first:
ib_send_bw -a
------------------------------------------------------------------
Send BW Test
Inline data is used up to 400 bytes message
Connection type : RC
test
max inline size 28
local address: LID 0000, QPN 0x5a020000, PSN 0xf50e0000, RKey 0x120008 VAddr 0x00000
001140040
remote address: LID 0000, QPN 0x5a020000, PSN 0x36090000, RKey 0x120000 VAddr 0x00000
001080040
Using grh is forced due to the use of RoCE
Mtu : 2048
------------------------------------------------------------------
#bytes #iterations BW peak[MB/sec] BW average[MB/sec]
ib_send_bw.exe -a 15.4.12.128
------------------------------------------------------------------
Send BW Test
Inline data is used up to 400 bytes message
Connection type : RC
max inline size 28
local address: LID 0000, QPN 0x5a020000, PSN 0x36090000, RKey 0x120000 VAddr 0x00000001080040
remote address: LID 0000, QPN 0x5a020000, PSN 0xf50e0000, RKey 0x120008 VAddr 0x00000001140040
Using grh is forced due to the use of RoCE
Mtu : 2048
------------------------------------------------------------------
#bytes #iterations BW peak[MB/sec] BW average[MB/sec]
2 1000 4.95 4.26
4 1000 9.91 7.76
8 1000 19.82 15.36
16 1000 39.64 31.09
32 1000 79.28 76.59
64 1000 158.55 154.08
128 1000 317.10 311.80
256 1000 634.20 557.29
512 1000 1268.40 857.03
1024 1000 2536.80 1389.27
2048 1000 1691.20 1452.51
ndpingpong.exe s 15.4.12.128 2222 p1