User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
Driver FeaturesRev 4.3
Mellanox Technologies
23
To create a new bundle, perform the following:
1. Click the Create button.
2. Enter a (unique) bundle name.
3. Select a bundle type.
4. Select the adapters to be included in the bundle (that have not been associated with a VLAN).
5. [Optional] Select Primary Adapter.
An active-passive scenario used for data transfer of link disconnecting. In such scenario, the
system uses one of the other interfaces. When the primary link comes up, the LBFO interface
returns to transfer data using the primary interface. If the primary adapter is not selected, the
primary interface is selected randomly.
6. [Optional] Failback to Primary
7. Click the Commit button.
The newly created virtual Mellanox adapter representing the bundle will be displayed by the
Device
Manager under “Network adapters” in the following format (see figure below):
Mellanox Virtual Miniport Driver - Team <bundle_name>