User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
24
To modify an existing bundle, perform the following:
1. Select the desired bundle and click Modify
2. Modify the bundle name, its type, and/or the participating adapters in the bundle
3. Click the Commit button
To remove an existing bundle, select the desired bundle and click Remove. You will be
prompted to approve this action.
Notes on this step:
a. Each adapter that participates in a bundle has two properties:
• Status: Connected/Disconnected/Disabled
• Role: Active or Backup
b. Each network adapter that is added or removed from a bundle gets refreshed (i.e. disabled then enabled).
This may cause a temporary loss of connection to the adapter.
c. In case a bundle loses one or more network adapters by a “create” or “modify” operation, the remaining
adapters in the bundle are automatically notified of the change.