User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
Performance TuningRev 4.3
Mellanox Technologies
39
5.1.4.3 Options
perf_tuning.exe -m -c1 <first connection name> -b <base RSS processor number> -n
<number of RSS processors>
perf_tuning -st -c1 <first connection name> [-c2 <second connection name>]
Flag Description
-s Single port traffic scenario.
This option can be followed by one or two connection names. The tuning will restore the
default settings on the second connection and performed on the first connection.
This option automatically sets:
• SendCompletionMethod = 0
• RecvCompletionMethod = 2
• *ReceiveBuffers = 1024
• UseRSSForRawIP = 1
• UseRSSForUDP = 1
• In Operating Systems support NDIS6.3:
RssProfile = 3
Additionally, this option chooses the best processors to assign to:
• DefaultRecvRingProcessor
• TxInterruptProcessor
• TxForwardingProcessor
• In Operating Systems support NDIS6.2:
RssBaseProcNumber
M
axRssProcessors
• In Operating Systems support NDIS6.3:
NumRSSQueues
RssMaxProcNumber
-d Dual port traffic scenario.
This option must be followed by two connection names. The tuning in this case is code-
pendent.
This option automatically sets:
• SendCompletionMethod = 0
• RecvCompletionMethod = 2
• *ReceiveBuffers = 1024
• UseRSSForRawIP = 1
• UseRSSForUDP = 1
• In Operating Systems support NDIS6.3:
RssProfile = 3
Additionally, this option chooses the best processors to assign to:
• DefaultRecvRingProcessor
• TxInterruptProcessor
• TxForwardingProcessor
• In Operating Systems support NDIS6.2:
RssBaseProcNumber
MaxRssProcessors
• In Operating Systems support NDIS6.3:
NumRSSQueues
RssMaxProcNumber