User Manual

WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
50
7.3.2 ibdiagnet
7.3.2.1 ibdiagnet Options
7.3.2.2 ibdiagnet Output Files
ibdiagnet [-c <count>] [-v] [-r] [-o <out-dir>]
[-t <topo-file>] [-s <sys-name>] [-i <dev-index>] [-p <port-num>]
[-pm] [-pc] [-P <<PM counter>=<Trash Limit>>]
[-lw <1x|4x|12x>] [-ls <2.5|5|10>]
[-skip <dup_guids|zero_guids|pm|logical_state>]
Flag Description
-c <count> Min number of packets to be sent across each link (default = 10
-v Enable verbose mode
-r Provides a report of the fabric qualities
-o <out-dir> Specifies the directory where the output files will be placed (default = /
tmp)
-t <topo-file> Specifies the topology file name
-s <sys-name> Specifies the local system name. Meaningful only if a topology file is
specified
-i <dev-index> Specifies the index of the device of the port used to connect to the IB fab-
ric (in case of multiple devices on the local system)
-p <port-num> Specifies the local device's port num used to connect to the IB fabric
-pm Dump all the fabric links, pm Counters into ibdiagnet.pm
-pc Reset all the fabric links pmCounters
-P <PM=<Trash>> If any of the provided pm is greater then its provided value, print it to
screen
-lw <1x|4x|12x> Specifies the expected link width
-ls <2.5|5|10> Specifies the expected link speed
-skip <skip-option(s)> Skip the executions of the selected checks. Skip options (one or more can
be specified): dup_guids zero_guids pm logical_state part ipoib all
Table 5 - ibdiagnet (of ibutils) Output Files
Output File Description
ibdiagnet.log A dump of all the application reports generate according to the provided flags
ibdiagnet.lst List of all the nodes, ports and links in the fabric
ibdiagnet.fdbs A dump of the unicast forwarding tables of the fabric switches