User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
InfiniBand FabricRev 4.3
Mellanox Technologies
55
7.3.4 ibroute
Uses SMPs to display the forwarding tables for unicast (LinearForwardingTable or LFT) or mul-
ticast (MulticastForwardingTable or MFT) for the specified switch LID and the optional lid
(mlid) range. The default range is all valid entries in the range of 1 to FDBTop.
7.3.4.1 ibroute Applicable Hardware
InfiniBand switches.
7.3.4.2 ibroute Synopsis
7.3.4.3 ibroute Options
The table below lists the various ibroute flags of the command.
# Show the new configuration
> ibportstate -C mlx4_0 -D 0 1
PortInfo:
# Port info: DR path slid 65535; dlid 65535; 0 port 1
LinkState:.......................Initialize
PhysLinkState:...................LinkUp
LinkWidthSupported:..............1X or 4X
LinkWidthEnabled:................1X or 4X
LinkWidthActive:.................4X
LinkSpeedSupported:..............2.5 Gbps or 5.0 Gbps
LinkSpeedEnabled:................5.0 Gbps (IBA extension)
LinkSpeedActive:.................5.0 Gbps
ibroute [-h] [-d] [-v] [-V] [-a] [-n] [-D] [-G] [-M] [-L] [-e] [-u] [-s <smlid>] \
[-C <ca_name>] [-P <ca_port>] [-t <timeout_ms>] \ [<dest dr_path|lid|guid>
[<startlid> [<endlid>]]]
Table 7 - ibroute Flags and Options
Flag Description
-h/--help Print the help menu
-d/--debug Raise the IB debug level. May be used several times for higher debug
levels (-ddd or -d -d -d)
-a/--all Show all LIDs in range, including invalid entries
-v/--verbose Increase verbosity level. May be used several times for additional verbos-
ity (-vvv or -v -v -v)
-V/--version Show version info
-n/--no_dests Do not try to resolve destinations