User Manual

WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
58
7.3.5.1 smpquery Applicable Hardware
All InfiniBand devices.
7.3.5.2 smpquery Synopsys
7.3.5.3 smpquery Options
The table below lists the various flags of the command.
smpquery [-h] [-d] [-e] [-c] [-v] [-D] [-G] [-s <smlid>] [-L] [-u] [-V] [-C
<ca_name>] [-P <ca_port>] [-t <timeout_ms>] [--node-name-map <node-name-map>]
<op> <dest dr_path|lid|guid> [op params]
Table 8 - smpquery Flags and Options
Flag Description
-h/--help Print the help menu
-d/--debug Raise the IB debug level. May be used several times for higher
debug levels (-ddd or -d -d -d)
-e/--errors Show send and receive errors (timeouts and others)
-v/--verbose Increase verbosity level. May be used several times for additional
verbosity (-vvv or -v -v -v)
-D/--Direct Use directed path address arguments. The path is a comma sepa-
rated list of out ports.
Examples:
‘0’ – self port
‘0,1,2,1,4’ – out via port 1, then 2, ...
-G/--Guid Use GUID address argument. In most cases, it is the Port GUID.
Example:
‘0x08f1040023’
-s/--sm_port <smlid> Use <smlid> as the target LID for SM/SA queries
-V/--version Show version info
-L/--Lid Use Lid address argument
-c/--combined Use combined route address argument
-u/--usage Usage message
-C/--Ca <ca_name> Use the specified channel adapter or router
-P/--Port <ca_port> Use the specified port
-t/--timeout <timeout_ms> Override the default timeout for the solicited MADs [msec]