User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
62
--Lid, -L Use LID address argument
--sm_port, -s <lid> SM port lid
--errors, -e Show send and receive errors
--verbose, -v Increase verbosity level
--usage, -u Usage message
--loop_ports, -l Loop ports
--reset_after_read, -r Reset the counters after reading them
--Ca, -C <ca_name> Use the specified channel adapter or router
--Port, -P <ca_port> Use the specified port
--Reset_only, -R Reset the counters
--timeout, -t <timeout_ms> Override the default timeout for the solicited MADs [msec]
--version, -V Show version info
<lid | guid>
[[port][reset_mask]]
LID or GUID
--extended, -x show extended port counters
--extended_speeds, -T show port extended speeds counters
--oprcvcounters show Rcv Counters per Op code
--flowctlcounters show flow control counters
--vloppackets show packets received per Op code per VL
--vlopdata show data received per Op code per VL
--vlxmitflowctlerrors show flow control update errors per VL
--vlxmitcounters show ticks waiting to transmit counters per VL
--swportvlcong show sw port VL congestion
--rcvcc show Rcv congestion control counters
--slrcvfecn show SL Rcv FECN counters
--slrcvbecn show SL Rcv BECN counters
--xmitcc show Xmit congestion control counters
--vlxmittimecc show VL Xmit Time congestion control counters
Table 9 - perfquery Flags and Options
Flag Description