User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
WinOF VPI for Windows User Manual Rev 4.3
Mellanox Technologies
70
Examples
• Unicast examples
• Multicast example
7.3.10 sminfo
Optionally sets and displays the output of a sminfo query in a readable format. The target SM is
the one listed in the local port info, or the SM specified by the optional SM lid or by the SM
direct routed path.
--Lid, -L Use LID address argument
--errors, -e Show send and receive errors
--usage, -u Usage message
--Guid, -G Use GUID address argument. In most cases, it is the Port GUID.
Example:
"0x08f1040023"
--sm_port, -s <smlid> Use 'smlid' as the target lid for SM/SA queries
--help, -h Show the usage message
-verbose, -v/-vv/-v -v -v Increase the application verbosity level
--version, -V Show the version info
--Ca, -C <ca_name> Use the specified ca_name
--Port, -P <ca_port> Use the specified ca_port
--timeout, -t <timeout_ms> Override the default timeout for the solicited mads
ibtracert 4 16 # show path between lids 4 and 16
ibtracert -n 4 16 # same, but using simple output format
ibtracert -G 0x8f1040396522d 0x002c9000100d051 # use guid addresses
ibtracert -m 0xc000 4 16 # show multicast path of mlid 0xc000 between lids 4 and
16
Using sminfo for any purposes other then simple query may result in a mal-
function of the target SM.
Table 12 - ibtracert Flags and Options
Flag Description