User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
Rev 4.3
Mellanox Technologies
7
Rev 2.1.2 October 10, 2010
• Removed section Debug Options.
• Updated Section 3, “Uninstalling Mellanox VPI Driver,” on
page 11
• Added Section 6, “InfiniBand Fabric,” on page 38 and its sub-
sections
• Added Section 6.3, “InfiniBand Fabric Performance Utilities,”
on page 71 and its subsections
Rev 2.1.1.1 July 14, 2010 Removed all references of InfiniHost® adapter since it is
not
supported starting with WinOF VPI v2.1.1
Rev 2.1.1 May 2010 First release
Table 1 - Document Revision History
Document
Revision
Date Changes