User Manual
Table Of Contents
- Notices
- Safety information
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Assembling the monitor arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Connecting the cables
- 2.4 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating mode
![](/manual/asus/pg278q/user-manual-english/images/img-19.png)
3-1ASUS PG278Q LCD Monitor
3.1 OSD (On-Screen Display) menu
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the (
) left repeatedly until the OSD menu disappears. To adjust other functions,
repeat steps 1-3.
You can adjust Brightness, Contrast and Color temperature from this menu.
: the adjusting range is from 0 to 100.
: the adjusting range is from 0 to 100.
: contains 4 modes including Cool, Normal, Warm, and User
Mode.