User Guide

3-2
Chapter 3: General Instructions
 : allows you to select a maximum refresh rate of 165Hz
(Only for DisplayPort input). After selecting, press the
( ) button
twice to activate the setting.
After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA
Control Panel. If you don’t see an image, disconnect the DP cable and use the
monitor OSD to try again with a safer Max Refresh Rate.
 
In this function, you can adjust the blue light filter level.
MOVE/ENTER
BACK
EXIT
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Level 0
Level 1
Level 2
Level 3
Level 4
Normal Mode HDMI 2560 x 1440@ 60Hz
Racing Mode
ASUS ROG PG278QR
 No change.
  The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
 
You can set the color related setting from this menu.
MOVE/ENTER
BACK
EXIT
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Brightness
Contrast
Saturation
Color Temp.
Gamma
80
50
Normal Mode HDMI 2560 x 1440@ 60Hz
Racing Mode
ASUS ROG PG278QR