User Manual

3-3ASUS PG279Q Series LCD Monitor
• In the Racing mode, the following function(s) are not user-configurable:
Saturation.
• In the sRGB mode, the following function(s) are not user-congurable:
Saturation, Color Temp., Brightness, Contrast.
 
In this function, you can adjust the blue light filter level.
MOVE/ENTER
BACK
EXIT
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279
Level o
Level 1
Level 2
Level 3
Level 4
Over Clocking
GameVisual
Blue Light Filter
Color
Image
Input Select
System Setup
 No change.
  The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
 
You can adjust Brightness, Contrast, Saturation and Color temperature from
this menu.
MOVE/ENTER
BACK
EXIT
Normal Mode DP 2560x1440@ 60Hz
ASUS ROG PG279
Brightness
Contrast
Saturation
Color Temp.
80
50
100
Over Clocking
GameVisual
Blue Light Filter
Color
Image
Input Select
System Setup
 : the adjusting range is from 0 to 100.
 : the adjusting range is from 0 to 100.
 : The adjusting range is from 0 to 100.
 : contains 4 modes including Cool, Normal, Warm, and User
Mode.