Server User Manual

ManualsBrandsAsus ManualsServerPI4

5-6 Chapter 5: RAID conguration

3. Select all the drives required for the RAID set, and then press <F10> to

congure array setting.

4. Press <Space> to select the congurable array.

2. The

ARRAY SELECTION MENU

displays the available drives connected to

the SATA ports. Use the up/down arrow key to select the drives you want to

include in the RAID set, and then press <Space>. When selected, the drive

indicator changes from

READY

ONLIN A[X]-[Y]

, where X is the array

number, and Y is the drive number.

• The information of the selected hard disk drive displays at the bottom of the

screen.

• You need at least two identical hard disk drives when creating a RAID 1 set.

• You need at least four identical hard disk drives when creating a RAID 10

set.

Management Menu

Congure

Initialize

Objects

Rebuild

Check Consistency

PORT #

DNLIN A00-00

DNLIN A00-01

Easy Conguration - ARRAY SELECTION MENU

Select Congurable Array(s)

A-0

SPAN-1

LSI Software RAID Conguration Utility Ver A.62 Apr 29, 2009

BIOS Version A.09.07211059R

Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Congure Esc-Quit