User Guide

1-4
Chapter 1: Product Introduction
PIKEIIcardSwitchpinsettingsandrecommendedconguration:
DRLED1
FAILLED1
HBLED1
DEFAULT_SEL1
1.3.1 Switch settings
When using more than one PIKE II card on your system, ensure to manually set the pin
settings on the Switch on each of the PIKE II cards to ensure that the system detects all the
cards installed. You can refer to the following table for the pin settings.
PIKE 3108
Switch Pin name Pin value
1 SW1 [1:2:3] 111
2 SW1 [1:2:3] 110
3 SW1 [1:2:3] 101
4 SW1 [1:2:3] 100
5 SW1 [1:2:3] 011
6 SW1 [1:2:3] 010
7 SW1 [1:2:3] 001
8 SW1 [1:2:3] 000