Manual

ManualsBrandsAsus ManualsMonitorsPM17TU

CONTENT

F.C.C. statement

Important safeguards

Chapter 1 Introduction

1.2 Features............................................................................................ j

1.3 Checking List.................................................................................... j

Chapter 2 Installation

2.1 Connect your monitor to a computer.

...........................................

Chapter 3 Overview of your monitor

3.1 Front Panel overview..................................................................... 3

Chapter 4 Operation

4.1 Power ON/OFF switch

....................................................................

4.2 Power indicator................................................................................ 4

4.3 Volume............................................................................................. 4

4.4 Menu features

..................................................................................

4.5 OSD menu........................................................................................ ^

4.6 Preset modes timing chart.............................................................. y

Chapter 5 Technical information

5.1 Signal Connector Pin Assignment.................................................. g

5.2 Visual Inspection

.............................................................................

5.3 Troubleshooting

.................................................................................

Summary of content (13 pages)

PAGE 1
CONTENT F.C.C. statement Important safeguards Chapter 1 Introduction 1.2 Features............................................................................................ j 1.3 Checking List.................................................................................... j Chapter 2 Installation 2.1 Connect your monitor to a computer............................................ 2 Chapter 3 Overview of your monitor 3.1 Front Panel overview...........................................................
PAGE 2
FEDERAL COMMUNICATIONS COMMISSION(F.C.C) STATEMENT This equipment has been tested and found to eomply with the limits of a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfid interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
IMPORTANT SAFEGUARDS Warnings: 1. Read all of these instructions Save these instructions for later use, Please. 2. Ut^lug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use attachments not recommended by the monitor manu&cturer as they may cause hazards. 4. Do not use this monitor near water. For example near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc... 5.
PAGE 4
Chapter 1 Introduction 1.1 Features 1. Horizontal frequencies: 31KHz to 80KHz. Vertical frequencies: 56Hz to 76Hz. 2. Microprocessor based with OSD (On Screen Display) control. 3. Compatible with standard IBM VGA,extended VGA,super VGA, IBM XGA modes, as well as VESA resolution standards. 4. Universal power supply. 5. Microsoft windows 95/98/2000/ME/XP compatible & VESA Display Data channel (DDC)1/2B compatible. 1.
PAGE 5
Chapter 2 Installation 2.1 Connect your monitor to computer 2.1.1 Turn off your computer and unplug its power cable. 2.1.2 Coimect the signal cable to the video port on the back of your computer. 2.1.3 Coimect the power cable for your monitor to the DC adapter and connect the adapter the DC power jack on the back of your monitor, you must use the supplied adapter. 2.1.
PAGE 6
Chapter 3 Overview of your monitor 3.1 Front Panel overview VO. © -> SET 0 T © MEMU 0 © AUTO O 1. Menu Button To push menu button turns on the menu, and it activates the items you highlight. 2. Volume Button To choose which function you need .you may choose + or — 3. Select Button To choose which function you need .you may choose ▼ counterclockwise or A Clockwise. 4. Auto Button Auto adjust the display mode to its utmost performance according to VGA setting. 5.
PAGE 7
Chapter 4 OPERATION Direct - Access Features 4.1 SWITCHING THE MONITOR ON/OFF This ON/OFF button is used for switching the monitor on and off. Note: The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage. Please remove the power plug from the socket. 4.2 POWER INDICATOR This indicator lights up green(PM17T/D)/blue(PM17TS) when the monitor operates normally.If the monitor is in power saving mode, this indicator change to orange.
PAGE 8
OPERATION Direct - Access Features 4.5 OSD MENU 1. Main menu OSD main menu of controls gives you an overview of the selection of controls available. When you want to make adjustment of the screen image, press and release button Menu 1024x768 C» o CË] O 3* E X I T © H = 6 0 . 0 K H z ^u 7 5 .1 H z 2. OSD Adjustment You can choose where you would like OSD image to appear on your screen. H-Position : & To move the OSD image horizontally left or right.
PAGE 9
OPERATION Direct - Access Features \ SET UP select menu. (Only for PM17T/PM17TS) 1. Input Seleet You can choose the signal input status which you need. 2. AUTO Select Auto adjust display mode to its utmost performance aceording to VGA setting. In the event of the display image needs further adjustment. In addition, press this key for more than three seconds, the input signal can be realized switching over automatically. 6.
PAGE 10
Chapter 4 OPERATION Direct - Access Features 4.6 Preset Modes Timing Chart Item Resolution (dots X lines) Horizontal Freq.(kHz) Vertical Freq.(Hz) 1 720 X400 31.47 70 2 640 X480 31.47 60 3 640 X480 37.86 72.8 4 640 X480 37.50 75 5 6 800 X600 800 X600 35.15 37.88 56.2 60.3 7 8 800 X600 800 X600 1024 X 768 48.08 46.87 48.36 72.2 75 60 1024 X 768 1024 X 768 56.48 60.02 70.1 75 1280 X 1024 1280 X 1024 63.
PAGE 11
Chapter 5 Technical Information 5.1 Signal connector pin assignment 1. PM17D/PM17T/PM17TS PIN 1 2 3 4 5 6 7 8 Signal (D-sub) Red Green Blue Ground Self Test Red Ground Green Ground Blue Ground 15-Pin mini D-iype male connector PIN 9 10 11 12 13 14 15 Signal (D-sub) NC or-1-5 V Input Ground Ground SDA (FOR DDC) H. Sync V.
PAGE 12
Chapter 5 Technical Information 2.
PAGE 13
Technical Information 5.3 Trouble shooting Before calling for service , check the information in this section to see if you can remedy any problems by yourself. If you need assistance, please call the dealer where you purchased the LCD monitor. There is no SCREEN image Please cheek these items: • The power cord is securely connected the monitor, the adaptor, and the waU outlet • Check the signal cable connection between the monitor and the computer. • Adjust the brightness and contrast controls.