User's Manual

PN Series

Turning your Mini PC off

If your Mini PC is unresponsive, press and hold the power button for at least

four(4)secondsuntilyourMiniPCturnso.

Putting your Mini PC to sleep

To put your Mini PC on Sleep mode, press the Power button once.

Entering the BIOS Setup

BIOS (Basic Input and Output System) stores system hardware settings that

are needed for system startup in the Mini PC.

In normal circumstances, the default BIOS settings apply to most conditions

to ensure optimal performance. Do not change the default BIOS settings

except in the following circumstances:

• Anerrormessageappearsonthescreenduringthesystembootupand

requestsyoutoruntheBIOSSetup.

• YouhaveinstalledanewsystemcomponentthatrequiresfurtherBIOS

settings or update.

WARNING! Inappropriate BIOS settings may result to instability

or boot failure. We strongly recommend that you change the BIOS

settings only with the help of a trained service personnel.