® System Management Software User’s Manual
Disclaimer/Copyrights Checklist No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS Contact Information Features ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: Telephone: Fax: Email: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 +886-2-2894-3447 +886-2-2894-3449 info@asus.com.tw Technical Support Tel (English): Tel (Chinese): Fax: Email: Newsgroup: WWW: FTP: +886-2-2890-7123 +886-2-2890-7113 +886-2-2893-7775 tsd@asus.com.tw news2.asus.com.tw www.asus.com.tw ftp.asus.com.
Contents Chapter Descriptions ................................................................... 7 ASMA Introduction ....................................................................... 8 Installing ASMA Software for Windows ..................................... 9 Install ASMA for Windows 2000 (CD Item 1) ............................ 10 Installing SNMP (for ASMA) ..........................................................11 Configuring SNMP (for ASMA) .....................................................
Contents (6) Inventory Items ....................................................................... 32 OS Information ....................................................................... 32 FRU Information ..................................................................... 32 PCI Devices ............................................................................ 32 Network Cards ........................................................................ 32 Event Log Viewer ..............................
Contents Using ASUS System Web-based Management ....................... 57 (1) The System Summary Information Screen ............................. 57 (2) System Summary Front View ................................................. 59 (3) System Summary Rear View .................................................. 59 (4) System Summary Top View .................................................... 60 (5) Detailed Heath Information .....................................................
About this Manual This User’s Manual is intended for advanced system administrators with hardware and software knowledge of server systems. Chapter Descriptions This User’s Manual contains the following parts: Chapter 1: ASMA for Windows This chapter describes installation procedures and information for proper setup of the ASUS System Monitoring Agent software in Microsoft Windows 2000.
ASMA for Windows ASMA Introduction ASUS System Monitoring Agent is an SNMP agent. This software module enables computers to be managed by Network Management Stations (NMSs) through the Internet. ASUS System Monitoring Agent can report computer fan RPMs, voltage levels, system temperatures, CPU temperatures, and chassis intrusion to the NMS. ASUS System Monitoring Agent can enable or disable Automatic Server Restart (ASR) function remotely from an NMS through the Internet.
ASMA for Windows Installing ASMA Software for Windows This chapter will show you the installation procedures and information needed to complete the software setup. When you insert the support CD in Windows, the following autorun menu will show. If your autorun is disabled, run bin\ASSETUP.EXE in the root of the CD.
ASMA for Windows Install ASMA for Windows 2000 (CD Item 1) Installs ASUS system monitoring agent for Windows 2000/NT4. NOTE: You must first install SNMP service before installing ASMA Before you install ASUS System Monitoring Agent, you should make sure that SNMP Service is already installed because the ASUS System Monitoring Agent need Windows SNMP service to work correctly. This software also supports Windows NT4.0 (Workstation and Server). Click Install ASMA for Windows 2000 on the autorun menu.
ASMA for Windows Installing SNMP (for ASMA) If you did not install SNMP, you will have to do it now. Find “Add/ Remove Programs” in the Control Panel and select Management and Monitoring Tools which will include Simple Network Management Protocol (SNMP).
ASMA for Windows Install ASMA for Windows 2000 (Cont’) Configuring SNMP (for ASMA) 1. Double click the SNMP Service in “Start | Administrative Tools | Services” 2. Click the Traps tab 3. Enter a “Community name” such as Public 4. Set a “Trap destination” IP address to the console you want the messages sent to. 5. Click the Security tab. 6.
ASMA for Windows Click Yes after reading the “License Agreement” Enter a user name and company name, then click Next to continue. Browse to another folder or click Next to use the default folder. Specify a program folder for the icons or click Next to use the default. Verify the information and click Next to continue. Once setup is complete, you can select to view the readme and click Finish. Enter your SMTP information and select “Enable ASMA Alert Mail”.
ASMA for Windows ASMA for WinNT Performance Monitor Extensions There are two ways that a user can monitor system temperature, voltage level and fan speed from NT Performance Monitor. Method 1: From the Windows NT desktop, choose Start | Programs | ASUS System Monitor Agent | Monitor. Click the icons from the Monitor that you can monitor the status of the system's temperature, voltages and fan speed.
ASMA for Windows Method 2: 1. From the Windows NT desktop, choose Start | Programs | Administrative Tools (Common) | Performance Monitor. 2. From the Performance Monitor choose Edit | Add to Chart to display the Add to Chart dialog box. Your computer's name should appear in the Computer field. To monitor a different computer, click the ... button to the right of the field, which displays a dialog box. 3. Select the computer you want to monitor from the list and click OK. 4.
ASMA for Windows ASMA for Windows NT Event Viewer There is one method that a user can view ASUS System Monitoring Agent event log from Windows NT 1. From the Windows NT desktop, choose Start | Programs | Administrative Tools (common) | Event Viewer and click it. 2. From the Event Viewer choose Log | Select Computer to display Select Computer dialog box. To view a different computer, select the computer you want to view from the list and click OK. 3.
ASWM for Windows ASUS System Web-based Management (Windows) Overview of ASWM for Windows ASWM is a web-base tool installed in server site to offer managed ability from HTTP protocol. That is, you can manage server just from any machine by web browser. Here are a few of the advantages you can acquire from ASWM. • • • • • The installation and configuration are easy. Only password and install directory need the choice of user. ASWM is web-base tool. Only web browsers is a requirement in client site.
ASWM for Windows ASUS System Web-based Management Features • Real Time Chart System summary - Health devices • MB Fans • MB Temperatures • MB Voltages • Backplane • Drives • Memory • CPU Inventory information • OS Information • FRU Information • PCI devices (Not supported in Windows NT) • Network cards • Event log viewer • VNC client Configuration • ASMA Configuration • ASWM Configuration 18 ASUS System Management Software User’s Manual
ASWM for Windows Install ASWM for Windows 2000 (CD Item 2) Installs ASUS System Web-based Management for Windows 2000. You cannot reinstall ASWM if it has already been installed. If you are installing a new version, you should uninstall the current version. Because files are shared out, it is highly recommended that you install ASWM on an NTFS partition for better security. NOTE: You must first install ASMA before installing ASWM.
ASWM for Windows Install ASWM for Windows 2000 (Cont’) Browse to a new destination folder or click Next to use the default. This message lets you know that NTFS is recommended, but you may still continue. Enter a password for accessing ASWM and click Next. Remember this password, you will need it to access ASWM using a Web browser. A default user “ASWM USER” will be automatically created. After setup is complete, select whether you want to allow all IP addresses to access ASWM.
ASWM for Windows Uninstalling ASWM (or other software) 1. Double-click Add/Remove Program in “Start | Settings | Control Panel”. 2. Select “ASWM Server Web-based Management”, and click Change/Remove to uninstall ASWM.
ASWM for Windows Accessing ASWM for Windows After you install the ASWM on the server, you can monitor the server using a web browser (Microsoft Internet Explorer recommended). Locally (on the server): Open your browser and type in: http://xxx:2623 or http://127.0.0.1:2623 Use your server name in place of “xxx” or use “127.0.0.1” as this is the universal address for the local computer. “2623” is the default port for the ASWM software.
ASWM for Windows Using ASUS System Web-based Management This chapter will introduce the ASWM software and explain how to use the ASWM to monitor your ASUS server system. The ASWM software accepts both Microsoft and Netscape browsers. This section will show examples using Explorer and the Linux section later in this manual will show examples of using Navigator/Communicator.
ASWM for Windows ASWM Web Display Each page of the ASWM will be different depending on the model of the ASUS server that you connect to. Microsoft Internet Explorer is recommended to utilize all the features in the ASWM. Netscape Navigator will have the following limitations: • • In the system summary page, no outlines (red rectangles) will be shown to indicate the current selection of the system image. Arrows cannot be dragged to set threshold values.
ASWM for Windows (2) System Summary Front View The backplane can detect the presence of hard disk drives (not the hot swap tray) and display pictures with an empty bay. Because it’s hard to show no hard drives while in the hot swap tray, the pictures will also show the trays removed even if you did not remove them. The Backplane will show the model number, number of disks (1, 2, 3), and temperature (˚C). The default safe upper temperature for the hard disk bays is 50˚C.
ASWM for Windows (4) System Summary Top View The top view has five hot spots; the blower, motherboard, left backplane, right backplane, and power supply (see front view for explanation) (see front view for explanation) (see front view for explanation) The system fan will show the RPM and status. The normal RPM range is preset by the factory. The Status will show: Normal, Warning, Critical.
ASWM for Windows (5) Detailed Heath Information Click on a link in the Health window to show detailed health information and threshold settings. Health: MB Fans The page will display the fan devices status of motherboard. The data contains name, current value, sketch map of current value, event status, statistic data and threshold value setting. Click to reset statistics Click to show threshold settings Statistics during this session is shown here Fan1 is the PCI cage fan.
ASWM for Windows Click on a link in the Health window to show detailed health information and threshold settings. Health: MB Voltages The page shows data supplied by the many motherboard’s voltage sensors. Health: Power Supply The page consist of three parts. The outline of the power modules, the status of each power module, and the status of the power fans. 1.
ASWM for Windows Click on a link in the Health window to show detailed health information and threshold settings. Health: Backplane ASWM will report the values supplied by the backplane monitors. You can investigate each monitor to see specific information pertaining to the individual backplane. Each backplane's page consists of 4 parts, the surface of the backplane board, the layout of the backplane, the situation of each drive bay, and the backplane temperature. 1.
ASWM for Windows Remapping the Backplane Here is an example of remapping the backplane. Two drives were originally detected when ASMA was installed. One disk has been intentionally removed. Click “remap” to remove the second drive from the backplane. A warning is given under the backplane: “The layout of Backplane 1 has been changed. If it is a reasonable circumstance, please remap it to keep away this trap, otherwise, please check over the server.
ASWM for Windows Click on a link in the Health window to show detailed health information and threshold settings. Health: Drives The page will show local hard drives, floppy drives, and CDROM drives on the server. It will also show volume names, file systems, storage loading, capacities, free space, status information, and customized threshold settings of hard drives. You can drag the arrows or edit the numeric fields to change threshold value settings.
ASWM for Windows (6) Inventory Items OS Information The page provides the information of operation system, including name, version, build number and service pack. FRU Information The page will enumerate several FRU information based on the layout of the server's hardware. You can click the tab on the top to browse individual FRU information. PCI Devices The page will enumerate PCI devices on the right side. You can click the link to browse the information of the device on the left side.
ASWM for Windows System Warning When warning events occur, yellow triangles will flash. When critical events occur red triangles will flash and the problem item marked with an “x”. When possible, a description is written in the monitor. NOTE: The values shown in this section are for reference purposes only and may not reflect the values shown by your system. The pictures shown will vary depending on server model and configuration.
ASWM for Windows System Real Time Chart Every value that you see in the ASWM corresponds to data while you are in the Real Time Chart view. So you cannot see historical values. You can let the Real Time Chart run over a few days to discover the highs and lows of a particular monitor. You can choose to chart fans, temperatures, voltages, backplane, drives, memory, and CPU. After choosing a category, choose the specific device. (You cannot chart multiple devices or multiple categories.
ASWM for Windows VNC Client The VNC client (installed with ASWM) allows you to remote control the server through any web browser just like “IBM Desktop on Call”. This allows true remote control to allow login/logout and shutdown/restart capabilities. Click the link to open the VNC Client in your web browser. A password will be required by the VNC. You can modify the password setting on server side but make sure it is a secure password. The installation program will set the default password to "aswm".
ASWM for Windows ASMA Configuration General ASWM allows you to configure ASMA settings. You can set the event action and device polling intervals on the General tab or set mail settings on the Alert Mail tab if you want ASWM to send an Email if something should go wrong. This page consists of two divisions; General settings and Alert Mail settings. Event Action Type If an overheat event occurs, ASWM will trigger the action you assigned here.
ASWM for Windows ASMA Configuration - Alert Mail This page allows you to configure Alert Mail properties for ASWM. All ASMA events are logged in the Windows event log but if you want to also email events to a specific location, you can setup this function here. Enable Send EMail Enable/Disable: To email ASMA events. SMTP Host Name/IP: SMTP host name used to send emails. SMTP Port xx: SMTP port used to send emails. Mail Account Name: The email account on the email server.
ASWM for Windows ASWM Configuration General This page allows you to configure General and IP Access properties for ASWM. Automatic update Enable means you always can view the updated data without refreshing the web page. If you disable the item, you have to refresh page manually to view updated data. Update Interval The time interval for ASWM to update the data. The value must be 5 seconds or more. NOTE: The “General” settings are saved in a cookie for your browser.
ASMA for Linux ASMA (ASUS System Monitor Agent) for LINUX Overview of ASMA for Linux Software Block Diagram: asma_agent asma driver H/W The above diagram shows that the ASMA driver is the basis for the asma package. To enable ASUS SNMP agent, you need to start asma_agent by issuing the asma_agent start command. Once the ASMA package has been correctly installed and started, you can use any SNMP console like HP’s OpenView with ASUS’ MIB file to get or set ASUS MIB variables.
ASMA for Linux Installation and Configuration Installation Type: rpm -ivh asma-3.0-18.i386.rpm Uninstallation Type: rpm -e asma-3.0-18 Because ASWM sits on top of ASMA, you cannot remove ASMA directly. Type: rpm -e --nodeps asma-3.0-18 inorder to bypass the dependency check to remove ASMA while leaving ASWM. Configuration To configure ASMA, type: asma_post_install Press [Enter] on a question to use the default setting in asma_post_install.
ASMA for Linux I. INSTALLATION PATH This screen will ask for paths to install the ASMA software, configuration files. You will also be asked for the path to the UCDSNMP tools that you have installed inorder to use the system’s SNMP funtion correctly. II. SNMP INFORMATION This screen shows setting up the system’s SNMP configuration using asma_post_install. After asma_post_install, if you want to change these settings by yourself, you can manually edit /etc/snmp/ snmpd.conf (see example on next page).
ASMA for Linux Example for “/etc/snmp/snmpd.conf”: ############################################################################### # Access Control ############################################################################### # First, map community name into a security name # sec.name source community com2sec mynetwork 192.168.0.0/16 public #### # Second, map security names into group names: # group MyRWGroup sec.model v1 sec.
ASMA for Linux Configuration Files The following example assumes {ASMA configuration path} is /etc/asus (default setting) a. /etc/asus/install_path.conf: setting for install path setting. There are two configuration types: one is ASMA (extension agent software) binary/configuration path; the other is snmpd daemon (system daemon) binary/configuration path. b. /etc/asus/asma.conf: setting for snmp upper/lower threshold value and ASR/Chassis Intrusion enable setting value.
ASMA for Linux c. /etc/asus/asma_misc.conf: if this file doesn’t exist, it will be created automatically based on the system situation when issuing the asma_agent start command. * LM78ChassisIntrusionExist=0; Motherboard hardware configuration for chassis intrusion type. 0 (none) 1 (photo sensor) 2 (micro switch - default) The user needs to know which type of motherboard is used. * ASRTimeOut=5; [ASR (Automatically System Restart) time out value, unit by min.
ASMA for Linux Function Description a. SNMP function 1. Get/Get Next: allows the SNMP console to get the attribute values of the managed system such as fan speed, working voltage, and system temperature. 2. Set: sets the attribute values of the managed system from the SNMP console. 3. Trap: managed computer system can inform the SNMP console of some event (when the interested attributes, such as fan, voltage, temperature, over or under thresholds) asynchronously. b.
ASMA for Linux Using SCSI RAID If your system has a SCSI RAID card, you will need to type the appropriate commands to load the driver into the system. Drivers Boot Driver insmod /etc/asus/tmp/${kernel_version}/rd124f.o Single Processor Driver insmod rd124f (or insmod /etc/asus/tmp/${kernel_version}/rd124f_mod.o) SMP Driver insmod rd124f (or insmod /etc/asus/tmp/${kernel_version}/rd124f_mod_smp.o) Enterprise Driver insmod /etc/asus/tmp/${kernel_version}/rd124f_mod_ent.
ASMA for Linux ASMA for Linux FAQ Q. Why does ucd-snmpd complain about security mode while it is starting? A. You need to check snmpd.conf for the following lines, (a) # groupName securityModel securityName group notConfigGroup any notConfigUser —> “securityModel” field needs to be “v1” (or “v2”/...) instead of “any” (b) # group context sec.model sec.level access notConfigGroup any noauth prefix read write notif 0 systemview none none —> “sec.Model” needs to be “v1” (or “v2”/...
ASUS System Management Software User’s Manual
ASWM for Linux Overview of ASWM for Linux Thank you for choosing ASUS hardware products. We believe that you will be very satisfied with ASUS hardware products due to its stability and quality. Now, ASUS tries its best to serve you further by offering you ASUS Web-based Management (ASWM) system with ASUS Management Agent (ASMA). Both of these software products will help you ease your daily system management tasks when you choose the LINUX operating system as your primary platform.
ASWM for Linux ASWM can also be easy customized. ASUS has prepared a very simple "post install" shell script to help system administrators customize a minimum working ASWM environment. Experienced administrators are welcomed to adjust anything and adopt these changes into the configuration files after you read “/usr/share/doc/ aswm-1.0/README”. Requirements Agent Site: Need to install ASWM Operation System: * GNU/Linux with Kernel V2.2 or above.
ASWM for Linux Features System summary Health devices * M/B Fans * M/B Temperatures * M/B Voltages * Power Modules (selected ASUS hardware configurations only) * Backplane(s) * Drives * Memory * CPU utilization Inventory information * FRU Information * PCI Devices * Network Cards * Message Logs * VNC client Configuration * ASMA Configuration * ASWM Configuration Chapter 5 : ASWM Software for Linux 51
ASWM for Linux Installing ASWM for Linux * Install the ASWM RPM distribution file as usual. # rpm -Uvh aswm-1.0-1.i386.rpm * After RPM installed, you should execute the shell script: /usr/bin/aswm_post_install * immediately and this will bring you a very simple conversation and it guides you how to set up some important values and parameters which ASWM will use. The following contents describe how the post installation is going. I. Configuration of Apache HTTP Server for ASWM 1.
ASWM for Linux 2. Input the password for the login id 'aswm' to access ASWM. ASWM uses Apache HTTP Server's password protection mechanism. Here you should set up the password for the default login ID 'aswm'. All web browsers connected to ASWM host will be asked the ID and password. ID is always 'aswm' and the password would be entered initially here. Please note that Apache maintains its own password file rather than the shadow password and user information file which used by the operating system itself.
ASWM for Linux III. Configuration of IP Access Information for ASWM 4. Input the IP address for a workstation to access ASWM? ASWM will dynamically check the web client's IP address and see if it is allowed to access ASWM. Here you could specify which IP addresses are permitted to view ASWM pages. The explanation of this question has revealed the input rules. a. Add IP addresses per line for clients which could access ASWM. b. By inputting * (asterisk symbol) character, all clients are able to access ASWM.
ASWM for Linux IV. Startup ASWM 5. Do you want to startup ASWM right now? Answer "Yes" if you want to start up ASWM daemon now or "No" to start it upon your next system bootup. NOTE: The ASWM service is dependent on the ASMA service. Make sure that you have installed ASMA before ASWM Operations After you installed the ASWM on the agent side and start the service, you can begin to manage the server using your web browser. * * * * Open a new web browser window and connect ASWM's by URL: http://xxx.xxx.xxx.
ASWM for Linux Uninstalling ASWM for Linux * First, make sure there are no resource lock to /var/www/aswm directory (since it has to be removed after uninstallation. Second, login system as root identity and execute the following rpm command to uninstall ASWM. i.e., # rpm -e aswm-1.0-1 * If you want to uninstall ASWM manually. You have to remove the following files from your host: /var/www/aswm/* /etc/rc.d/rc3.d/S86httpd_aswm /etc/rc.d/rc5.d/S86httpd_aswm /etc/rc.d/rc0.d/K14httpd_aswm /etc/rc.d/init.
ASWM for Linux Using ASUS System Web-based Management This chapter will introduce the ASWM software and explain how to use the ASWM to monitor your ASUS server system. The ASWM software accepts both Microsoft and Netscape browsers. This section will show examples using Navigator/Communicator and the Windows section earlier in this manual shows examples of using Explorer.
ASWM for Linux Properties Computer Name: The name of the server you are connecting to. System Current Time: The clock time of the server (not GMT Time). System Up Time: The operation time from system bootup of the server. System Product Name: The model name or product name of the server. Operating System: The operating system of the server. Motherboard: The motherboard model name of the server. BIOS Version: The BIOS model and version number of the server.
ASWM for Linux (2) System Summary Front View The backplane can detect the presence of hard disk drives (not the hot swap tray) and display pictures with an empty bay. Because it’s hard to show no hard drives while in the hot swap tray, the pictures will also show the trays removed even if you did not remove them. The Backplane will show the model name, temperature (˚C), and the default drive bay’s status. The default safe upper temperature for the drive disk bays is 60˚C.
ASWM for Linux (4) System Summary Top View The top view has five hot spots; the blower, motherboard, left backplane, right backplane, and power supply (see front view for explanation) (see front view for explanation) (see front view for explanation) The system fan will show the RPM and status. The normal RPM range is preset by the factory. The motherboard will show model name, Fan1 RPM, Fan2 RPM, motherboard temperature, CPU1 temperature, and CPU2 temperature (if installed) Fan4 is the CPU blower.
ASWM for Linux (5) Detailed Heath Information Click on a link in the Health window to show detailed health information and threshold settings. Health: MB Fans The page will display the fan devices status of motherboard. The data contains name, current value, event status, statistic data and threshold value setting. Click to reset statistics Click to show threshold settings Statistics during this session is shown here Fan1 is the PCI cage fan.
ASWM for Linux Click on a link in the Health window to show detailed health information and threshold settings. Health: MB Voltages The page shows data supplied by the many motherboard’s voltage sensors. Health: Power Supply The page consist of two parts: The status of each power module and the status of the power fans. Power Module Status Reports the status and values of each power monitor. A warning will be made if power cord or power module fails or is unplugged.
ASWM for Linux Click on a link in the Health window to show detailed health information and threshold settings. Health: Backplane ASWM will report the values supplied by the backplane monitors. You can investigate each monitor to see specific information pertaining to the individual backplane. Each backplane's page consists of 2 parts, the situation of each drive bay, and the backplane name and temperature.
ASWM for Linux Remapping the Backplane Here is an example of remapping the backplane. Two drives were originally detected when ASMA was installed. One disk has been intentionally removed. A warning is given under the backplane: “The Hard Drive is plugged out Drive Bay 2 of the (IDSEL1=ON & IDSEL0=ON) BackPlane board” This message means that if the drive change was unintentional, you should visually check the server for problems.
ASWM for Linux Click on a link in the Health window to show detailed health information and threshold settings. Health: Drives The page will show mounted file systems. It will also show file systems, storage loading, capacities, free space, and customized threshold settings of the file systems. You can edit the numeric fields to change threshold value settings. Health: Memory This page contains the health information of the system’s physical and virtual memory usage.
ASWM for Linux (6) Inventory Items FRU Information The page will enumerate several FRU information based on the layout of the server's hardware. You can click the tab on the top to browse individual FRU information. PCI Devices The page will enumerate PCI devices on the right side. You can click the link to browse the information of the device on the left side. The information consists of 3 columns. The first column is General, it'll show device type, manufacturer and device location.
ASWM for Linux System Warning When warning events occur, yellow triangles will flash. When critical events occur red triangles will flash and the problem item marked with an “x”. When possible, a description is written in the monitor. NOTE: The values shown in this section are for reference purposes only and may not reflect the values shown by your system. The pictures shown will vary depending on server model and configuration.
ASWM for Linux System Real Time Chart Every value that you see in the ASWM corresponds to data while you are in the Real Time Chart view. So you cannot see historical values. You can let the Real Time Chart run over a few days to discover the highs and lows of a particular monitor. You can choose to chart fans, temperatures, voltages, backplane, drives, memory, and CPU. After choosing a category, choose the specific device. (You cannot chart multiple devices or multiple categories.
ASWM for Linux VNC Client The VNC client allows you to remote control the server through any web browser just like “IBM Desktop on Call”. This allows true remote control to allow login/logout and shutdown/restart capabilities. Click the link to open the VNC Client in your web browser. A password will be required by the VNC. You can modify the password setting on server side but make sure it is a secure password. NOTE: The password for VNC is case-sensitive.
ASWM for Linux VNC Client: Click this link to start a VNC session in your Internet browser. A password will be required by VNC. You can modify the password using the vncpasswd utility. It is highly recommended that you change the password as soon as possible to prevent unwanted users. In Linux systems, you can open numerous “vncservers” as you like. Each one has its own VNC display number. In fact, there are "virtual" X displays.
ASWM for Linux ASMA Configuration General ASWM allows you to configure ASMA settings. You can set the event action and device polling intervals on the General tab or set mail settings on the Alert Mail tab if you want ASWM to send an Email if something should go wrong. This page consists of two divisions; General settings and Alert Mail settings. Event Action Type If an overheat event occurs, ASWM will trigger the action you assigned here.
ASWM for Linux Enable Repeated Trap You can enable/disable multiple warnings (until problem corrected) for the same problem. Reboot System Reboot system immediately. Reset Resets all device threshold values and ASMA settings to its default value.
ASWM for Linux ASMA Configuration - Alert Mail This page allows you to configure Alert Mail properties for ASWM. All ASMA events are logged in the Windows event log but if you want to also email events to a specific location, you can setup this function here. Enable Send Email Enable/Disable: To email ASMA events. From Address Any Text: Specify where the email is sent from. To Address Email Address: Specify the email address of the recipient.
ASWM for Linux ASWM Configuration General This page allows you to configure General and IP Access properties for ASWM. Automatic update Enable means you always can view the updated data. (See the FAQ at the end of this chapter for more explanation.) Update Interval The time interval for ASWM to update the data. The value must be 5 seconds or more. IP Access Restrictions All IP Enable If you want to allow access from anywhere, select this item to allow all IP address to connect to ASWM.
ASWM for Linux ASWM for Linux FAQ Q. How do I know that ASWM is installed on a host? A. There are many ways to check this. First, you can use rpm: # rpm -qa | grep aswm rpm will report a package named aswm-1.0-1 (version and release numbers will vary) if ASWM is installed. Second, you can check if the directory /var/www/aswm exists along with the file /etc/rc.d/init.d/httpd_aswm. Q. What will happen if I did not do a "post installation"? A.
ASWM for Linux Q. How can I check whether ASWM has started? And how do I start it manually if it has not started? A. You can use the “ps” command to check. For example: # ps ax | grep http And if you see some process entry such as XXXXX ? S X:XX /usr/sbin/httpd -f /var/www/aswm/conf/httpd.conf where X could be any digit. Then at least the Apache HTTP Server has started. If ASWM has not started, just login as the root user and execute: # /etc/rc.d/init.
ASWM for Linux Q. The browser showed a message “Browser lost connection to ASWM server. Close and reopen a new browser and connect ASWM server after the problem is fixed.” Is anything wrong here? A. While automatic update feature is enabled, ASWM pages will routinely detect the network status. If network problems occurs that stops your Internet connection, the links on the left side will no longer respond.
ASWM for Linux Q. The manual emphasizes that ASWM uses web pages based on the Apache HTTP Server. Is there anything I should know about the ASWM's configuration file for httpd? A. ASWM are web pages which perform ASMA functions. However, these web pages are written in PHP scripts and extensively dependent on the SNMP functions in the Apache's PHP module. Since SNMP features are not initially included in PHP module libphp4.
ASMA for Netware Install ASMA for Netware 4.x/5.x/6.x (CD Item 3) NOTE: ASMA for Netware does not support ASWM. On some server models, ASMA is not supported on Netware 5.x. Before you install ASUS System Monitoring Agent For NetWare, you should make sure that SNMP NLM is already installed properly in the Netware system, because the ASUS System Monitoring Agent For NetWare needs NWSNMP (Netware SNMP) to work correctly. This Software can run on Netware 3.12, Netware 4.x, 5.x, 6.x. For Netware 3.
ASMA for Netware Install and configure SNMP service on Netware 4.x/5.x/6.x Installing: - When Netware Server installed successfully, then NWSNMP is installed too. - NWSNMP loads automatically when Netware server starts. Default NWSNMP service is SNMP Get function (monitoring only). - User can Configure NWSNMP option to own SNMP Set and SNMP Trap functions. Configuring SNMP Set: - User can add/modify the LOAD SNMP line in the AUTOEXEC.NCF.
ASMA for Netware Install ASMA for Netware 4.x / 5.x / 6.x (Cont’) To Install ASMA for Netware, you must specify the install path to \\Network Computer Name\SYS\SYSTEM. For example, you can specify a mapped drive (such as N) to \\Network Computer Name\SYS, and specify the install path to N:\SYSTEM (Where N is your mapped drive). When you install ASMA, you should follow the procedures listed below. At "Choose Destination Location" dialog box. 1. Click Browser to choose a destination. 2.
ASMA for Netware Install ASMA for Netware 4.x / 5.x / 6.x - Installation Screens 82 Click Install ASMA for Windows 2000 on the autorun menu. Click Next after reading the “Welcome” message. Click Yes after reading the “License Agreement”. Click Next after reading the “Information”. Click Next after to confirm installation directory. NOTE: The above path is incorrect. You must install to a drive letter that is mapped to Novell Netware’s \SYS\SYSTEM directory.
Appendix Appendix Temperature Conversion Chart Celsius 00 C 01 C 02 C 03 C 04 C 05 C 06 C 07 C 08 C 09 C 10 C 11 C 12 C 13 C 14 C 15 C 16 C 17 C 18 C 19 C 20 C 21 C 22 C 23 C 24 C 25 C 26 C 27 C 28 C 29 C 30 C Fahrenheit 32.0 F 33.8 F 35.6 F 37.4 F 39.2 F 41.0 F 42.8 F 44.6 F 46.4 F 48.2 F 50.0 F 51.8 F 53.6 F 55.4 F 57.2 F 59.0 F 60.8 F 62.6 F 64.4 F 66.2 F 68.0 F 69.8 F 71.6 F 73.4 F 75.2 F 77.0 F 78.8 F 80.6 F 82.4 F 84.2 F 86.0 F The equation for converting Fahrenheit to Celsius is: [(Deg.