User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
18
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
DRAM Frequency
Forces a DDR5 frequency slower than the common tCK detected via SPD.
Configuration options: [Auto] [DDR5-2000MHz] - [DDR5-20000MHz]
FCLK Frequency
Allows you to specify the FCLK frequency.
Configuration options: [Auto] [800MHz] - [3000MHz]
Core Performance Boost
Automatically overclocks the CPU and DRAM to enhance system performance.
Configuration options: [Auto] [Enabled] [Disabled]
CPU Core Ratio
Allows you to set the CPU core ratio.
Configuration options: [Auto] [12.00] - [100.00]
CPU Core Ratio (Per CCX)
The sub-items in this menu allow you to adjust Core Ratios for each CCX.
Core VID
Allows you to specify a custom CPU core VID. Power saving features for idle cores
(e.g. cc6 sleep) remain active.
Configuration options: [Auto] [0.700] - [1.700]
CCD0
CCX0 Ratio
Allows you to specify a custom Core Ratio for this CCX.
Configuration options: [Auto] [12.00] - [100.00]
Dynamic OC Switcher
Enabling this dynamically switches back and forth between OC mode and Default
modes based on current and temperature threshold specified.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when Dynamic OC Switcher is set to [Enabled].
Current Threshold to Switch to OC Mode
Set this threshold to control when the CPU goes into OC Mode and when it comes
back to default. Bigger than this value = OC Mode, smaller than this value = Default
Mode. We recommend a value of 40A for single CCD and 60A for two CCDs.
Configuration options: [Auto] [0] - [255]
Calibrated Temperature Threshold to switch back
Set this threshold to control when the CPU returns to default mode. When CPU
Calibrated Temperature is bigger than this threshold, CPU returns to default. Likewise,
when temperature is smaller than this threshold AND current is bigger than Current
Threshold, CPU slips into OC Mode. In Celsius Unit.
Configuration options: [Auto] [0] - [140]