User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
19
Hysteresis
Higher numbers increase the time required to persist in state when crossing
thresholds before switching. Set to 0 for fastest reaction and increase this to require
longer times to remain said state before activation.
Configuration options: [Auto] [0] - [255]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [Auto] using the
keyboard and press the <Enter> key. You can also select various Memory Presets to load
settings suitably tuned for some memory modules.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency
Configuration options: [Auto] [2] - [64]
DRAM RAS# to CAS# Delay
Configuration options: [Auto] [1] - [63]
DRAM RAS# PRE Time
Configuration options: [Auto] [1] - [63]
DRAM RAS# ACT Time
Configuration options: [Auto] [1] - [127]
Secondary Timings
DRAM Row Cycle Time
Configuration options: [Auto] [1] - [255]
DRAM WRITE to READ Delay
Configuration options: [Auto] [2] - [126]
DRAM REF Cycle Time
Configuration options: [Auto] [1] - [4095]
Trfc2
Configuration options: [Auto] [1] - [4095]
Trfcsb
Configuration options: [Auto] [1] - [2047]
DRAM READ to PRE Time
Configuration options: [Auto] [1] - [31]
DRAM RAS# to RAS# Delay L
Configuration options: [Auto] [1] - [31]
DRAM RAS# to RAS# Delay S
Configuration options: [Auto] [1] - [31]