User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
25
CPU Power Phase Control
Allows you to set the power phase control of the CPU.
[Auto] Automatically selects the power phase control.
[Standard] The number of active phases is controlled by the CPU.
[Optimized] Set to the ASUS optimized phase tuning profile.
[Extreme] Sets full phase mode.
[Manual] Manually select the power phase response speed.
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
The following item appears only when CPU Power Phase Control is set to [Manual].
Power Phase Response
Select ultra fast mode for a faster power phase response. The reaction time will be
longer when regular mode is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
VDDSOC Load-Line Calibration
Configuration options: [Auto] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] [Level 6]
[Level 7] [Level 8]
VDDSOC Current Capability
Configuration options: [Auto] [100%] - [140%]
VDDSOC Switching Frequency
Configuration options: [Auto] [Manual]
The following item appears only when VDDSOC Switching Frequencyis set to [Manual].
Fixed VDDSOC VRM Switching Frequency(KHz)
Allows you to set a higher frequency for a quicker transient response speed. The
values range from 300 KHz to 800 KHz with an interval of 50 KHz.
VDDSOC Power Duty Control
VDDSOC power duty control adjusts the duty cycle of each VRM phase based upon
current and/or temperature.
[T. Probe] Sets the buck controller to balance VRM FET temperatures
[Extreme] Select to set the VRM current balance mode.
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
VDDSOC Power Phase Control
Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Manual]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.