User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
34
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
6.3 AMD CBS
The items in this menu shows the AMD Common BIOS Specifications.
The configuration options for this section vary depending on the motherboard. Please refer
to the BIOS of your motherboard for the actual settings and options.
Global C-state Control
Allows you to control IO based C-state generation and DF C-states.
Configuration options: [Disabled] [Enabled] [Auto]
IOMMU
Allows you to enable or disable IOMMU.
Configuration options: [Disabled] [Enabled] [Auto]
ECC
Allows you to enable or disable ECC. Setting this item to [Auto] will set ECC to enable.
Configuration options: [Disabled] [Enabled] [Auto]
SMT Control
Can be used to disable symmetric multithreading. To re-enable SMT, a POWER CYCLE is
needed after setting this item to [Auto].
Configuration options: [Disable] [Auto]
Core Performance Boost
Allows you to disable Core Performance Boost.
Configuration options: [Disabled] [Auto]
CPU Common Options
Thread Enablement
Performance