User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
41
The following item appears only when TrrdS Ctrl is set to [Manual].
TrrdS
Specifies the Activate to Activate Delay Time, different bank group
(tRRD_S). Valid values: 0x4 ~ 0x14. The value is in hex.
Tfaw Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Tfaw Ctrl is set to [Manual].
Tfaw
Specifies the Four Activate Window Time. Valid values: 0x14 ~ 0x50.
The value is in hex.
TwtrL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwtrL Ctrl is set to [Manual].
TwtrL
Specifies the Minimum Write to Read Time, the same bank group.
Valid values: 0x8 ~ 0x30. The value is in hex.
TwtrS Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwtrS Ctrl is set to [Manual].
TwtrS
Specifies the Minimum Write to Read Time, different bank group.
Valid values: 0x2 ~ 0x10. The value is in hex.
TrdrdScL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdScL Ctrl is set to [Manual].
TrdrdScL
Specifies the CAS to CAS delay time, same bank group. Valid values:
0x1 ~ 0xF. The value is in hex.
TrdrdSc Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdSc Ctrl is set to [Manual].
TrdrdSc
Specifies the Read to Read turnaround timing in the same chipselect.
Valid values: 0x1 ~ 0xF. The value is in hex.