User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
46
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
PSPP Policy
Configuration options: [Disabled] [Balanced] [Auto]
GFX Configuration
This item allows you to configure GFX Configuration.
UMA Version
[Legacy] UMA Legacy Version
[Non-Legacy] UMA Non-Legacy Version
[Auto] Hybrid Secure
GPU Host Translation Cache
Allows you to enable or disable GPU Host Translation Cache.
Configuration options: [Disabled] [Enabled] [Auto]
Audio Configuration
This item allows you to configure Audio Configuration.
NB Azalia
Allows you to enable or disable the integrated HD audio controller.
Configuration options: [Disabled] [Enabled] [Auto]
Audio IOs
Configuration options: [Auto] [HDA(3SDI) + PDM(2CH)(Default)] [HDA (1SDI)
+ PDM(6CH)] [HDA(1SDI) + SW0(1MDATA) + PDM(2CH)] [SW0(4MDATA) +
PDM(6CH)] [SW0(4MDATA) + SW1(1MDATA) + PDM(2CH)]
PCIe loopback Mode
Allows you to enable or disable PcieLoopBackMode.
Configuration options: [Auto] [Disabled] [Enabled]
SMU Common Options
TDP Control
[Auto] Use the default sustained power limit.
[Manual] User can set customized sustained power limit.
The following item appears only when TDP Control is set to [Manual].
TDP
Allows you to set the sustained power limit [mW].
PPT Control
[Auto] Use the default PPT Limits.
[Manual] User can set customized PPT Limits.
The following item appears only when PPT Control is set to [Manual].
PPT
Allows you to set the PPT [mW].
Thermal Control
[Auto] Use the default TctlMax.
[Manual] User can set customized TctlMax.
The following item appears only when Thermal Control is set to [Manual].
TjMax
Allows you to set the maximum operating temperature [‘C] (IRM limit will be enforced).