User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
51
The Mass Storage Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
Legacy USB Support
[Enabled] Your system supports the USB devices in legacy operating systems.
[Disabled] Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
[Auto] Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
[Disabled] Support XHCI by XHCI drivers for operating systems with XHCI support.
[Enabled] Support XHCI by BIOS for operating systems without XHCI support.
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support
Configuration options: [Disabled] [Enabled]
Mass Storage Devices:
Allows you to select the mass storage device emulation type for devices connected. [Auto]
enumerates devices according to their media format. Optical drives are emulated as [CD-
ROM], drives with no media will be emulated according to a drive type.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]
6.6 USB Configuration
The items in this menu allow you to change the USB-related features.