User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
55
SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system
that shows a warning message during POST (Power-on Self Test) when an error occurs in
the hard disks.
Configuration options: [Disabled] [Enabled]
SATA6G_1 - SATA6G_4
Allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
SATA6G_1 - SATA6G_4 Hot Plug
Designates this port as Hot Pluggable.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss
Allows your system to go to ON state, OFF state, or both states after an AC power loss.
When setting your system to [Last State], it goes to the previous state before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
ErP Ready
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options are switched off. RGB LEDs and
RGB/Addressable RGB Headers will also be disabled.
Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
Max Power Saving
Configuration options: [Disabled] [Enabled]
6.11 APM Configuration
The items in this menu allow you to change the advanced power management settings.