User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Trusted Computing
- 6.2 AMD fTPM configuration
- 6.3 AMD CBS
- 6.4 CPU Configuration
- 6.5 PCI Subsystem Settings
- 6.6 USB Configuration
- 6.7 Network Stack Configuration
- 6.8 NVMe Configuration
- 6.9 HDD/SSD SMART Information
- 6.10 SATA Configuration
- 6.11 APM Configuration
- 6.12 Onboard Devices Configuration
- 6.13 NB Configuration
- 6.14 AMD PBS
- 6.15 AMD Overclocking
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
64
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
Tras Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Tras Ctrl is set to [Manual].
Tras
Specifies Active to Precharge Delay Time. Valid values: 0x1E ~ 0x7E
with a stepping of 2.
Trc Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trc Ctrl is set to [Manual].
Trc
Specifies Active to Active/Refresh Delay Time. Valid values: 0x20 ~
0xFF. The value is in hex.
Twr Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Twr Ctrl is set to [Manual].
Twr
Specifies the Minimum Write Recovery Time. Valid values: 0x30 ~
0x60. The value is in hex.
Trfc1 Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trfc1 Ctrl is set to [Manual].
Trfc1
Specifies the Refresh Recovery Delay Time (tRFC1). Valid values:
0x32 ~ 0xFFF. The value is in hex.
Trfc2 Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trfc2 Ctrl is set to [Manual].
Trfc2
Specifies the Refresh Recovery Delay Time (tRFC2). Valid values:
0x32 ~ 0xFFF. The value is in hex.
TrfcSb Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.