User Manual

PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual

VDDP Voltage Control

Allows the user to adjust the VDDP voltage.

[Auto] VDDP is system default.

[Manual] Set voltage for the DDR bus signaling (PHY).

The following items appear only when VDDP Voltage Control is set to [Manual].

VDDP Voltage Adjust

VDDP is a voltage for the DDR bus signaling (PHY), and it is dervied from your DRAM

Voltage (VDDIO_Mem). As a result, VDDP voltage in mV can approach but not

exceed your DRAM Voltage.

Configuration options: [0] - [2000]

SoC/Uncore OC Mode

Forces CPU SoC/Uncore components (e.g. Infinity Fabric, memory, and integrated

graphics) to run at their maximum specified frequency at all times. May improve

performance at the expense of idle power savings.

Configuration options: [Auto] [Enabled] [Disabled]

SoC Voltage

Specifies the SoC/Uncore voltage (VDD_SOC) in mV to support memory and Infinity

Fabric overclocking. VDD_SOC also determines the GPU voltage on processors

with integrated graphics. This voltage can only change when one of ‘SoC/Uncore OC

Mode’, ‘UCLK’, ‘MCLK’, [FCLK’ is changed.

Configuration options: [0] - [2800]

LN2 Mode

Enables settings that provide additional stability at extreme cold operatinf

temperatures.

Configuration options: [Auto] [Disabled] [Enabled]

VDD Misc

VDD Misc Control

Allows the user to adjust the VDD Misc Voltage.

[Auto] VDD MISC is set to system default.

[Manual] Set voltage for the GMI PHY.

The following item appears only when VDD Misc Control is set to [Manual].

VDD Misc Voltage

Specifies the VDD MISC Voltage in mV, definitely follow SVI3 type 2 Slave VID (500-

5600mV, step 10mV).

Configuration options: [500] - [5600]