User Manual

86
PRIME / ProArt / TUF GAMING AMD 600 Series BIOS Manual
The following item appears only when Boot Logo Display is set to [Disabled].
Post Report
Allows you to select a desired POST report waiting time or until ESC is pressed.
Configuration options: [1 sec] - [10 sec] [Until Press ESC]
Boot up NumLock State
Allows you to select the keyboard NumLock state.
Configuration options: [On] [Off]
Wait For ‘F1’ If Error
Allows your system to wait for the <F1> key to be pressed when error occurs.
Configuration options: [Disabled] [Enabled]
Option ROM Messages
[Force BIOS]
The Option ROM Messages will be shown during the POST.
[Keep Current] Only the ASUS logo will be shown during the POST.
Interrupt 19 Capture
Enable this item to allow the option ROMs to trap the interrupt 19.
Configuration options: [Enabled] [Disabled]
AMI Native NVMe Driver Support
Allows you to enable or disable AMI Native NVMe driver.
Configuration options: [Disabled] [Enabled]
Setup Mode
[Advanced Mode]
This item allows you to go to Advanced Mode of the BIOS after
POST.
[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
• To access Windows
®
OS in Safe Mode, press <F8 > after POST (Windows
®
8 not
supported).
• To select the boot device during system startup, press <F8> when ASUS Logo
appears.
Boot Override
These item displays the available devices. The number of device items that appear on the
screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.