BIOS 用戶手冊 Motherboard PRIME / ProArt / TUF GAMING Intel 600 系列
C19474 第一版 2022 年 1 月發行 版權說明 © ASUSTeK Computer Inc. All rights reserved.
目錄 1. 2. 認識 BIOS 程序.............................................................................................................4 BIOS 設置程序..............................................................................................................5 2.1 EZ Mode......................................................................................................6 2.2 高級模式(Advanced Mode)...........................................................7 2.3 Q-Fan Control.......................................
BIOS 程序設置 1.
2.
2.
2.
功能表列 BIOS 設置程序最上方各菜單功能說明如下: My Favorites 本項目將記錄時常使用的系統設置及設置值。 Main 本項目提供系統基本設置。 Ai Tweaker 本項目提供超頻設置。 Advanced 本項目提供系統高級功能設置。 Monitor 本項目提供溫度、電源及風扇功能設置。 Boot 本項目提供啟動磁盤設置。 Tool 本項目提供特殊功能設置。 Exit 本項目提供退出 BIOS 設置程序與出廠默認值還原功能。 菜單項目 於功能表列選定選項時,被選擇的功能將會反白,即可選擇 Main 菜單所出現的項 目。 點擊菜單中的其他項目 (例如:My Favorite、Ai Tweaker、Advanced、Monitor、Boot、Tool 與 Exit)也 會出現該項目各自不同的選項。 子菜單 在菜單畫面中,若功能選項前面有一個小三角形標記(>),代表此為子菜單,您可 利用方向鍵來選擇,並按下 鍵來進入子菜單。 語言 這個按鈕位在功能表列的上方,用來選擇 BIOS 程序界面顯示的語言。點擊這個按鈕 來選擇您想要的 BIOS 畫面顯示語
AI OC Guide 這個按鈕位在功能表列的上方,用來查看超頻的敘述並且可以啟動該功能。您也可以 通過按下 鍵以使用此項目。 • 請參考 AI OC Guide 一節以獲得更多信息。 • 這項功能只有在安裝沒有鎖頻的處理器時才能使用。 搜索 這個按鈕用來通過輸入名稱搜索 BIOS 項目,輸入名稱可以找到相關的項目列表。 AURA ON/OFF 這個按鈕用來啟動或關閉 Aura 特效或功能性 LED 指示燈。 [All ON] 啟動所有的 LED 指示燈(Aura 特效或是功能性指示燈)。 [Aura Only] 啟動 Aura 特效,而功能性指示燈將會關閉。 [Aura OFF] 關閉 Aura 特效,而功能性指示燈依舊為開啟狀態。 [Stealth Mode] 關閉所有的 LED 指示燈(Aura 特效與功能性指示燈)。 ReSize BAR 這個按鈕用來啟動或關閉 ReSize BAR 功能。 [On] 啟動 ReSize BAR 支持以充分利用 GPU 內存。CSM(兼容性支持模 塊)將會關閉。 [Off] 關閉 ReSize BAR 支持。 MemTest8
設置窗口 此區域顯示菜單項目的設置值。若項目是用戶手冊可以設置的,您可以更改該項目的 數值;若是無法設置,則無法選取該項目。 設置值被選擇後會以反白顯示。要改變設置值請選擇此項目,並按下 鍵以顯 示設置值列表。 上次修改的設置按鈕 按下此按鈕可查看您在 BIOS 設置中上一次所做的修改項目。 10 PRIME / ProArt / TUF GAMING Intel 600 系列 BIOS 用戶手冊
2.
手動設置風扇 從設置文件清單中選擇 Manual 來手動設置風扇運行的速度。 速度點 點擊以手動設置風扇 請依照以下步驟設置風扇: 12 1. 選擇想要設置的風扇並查看該風扇現在的狀況。 2. 點擊並拖曳速度點來調整風扇的運行速度。 3.
3.
添加項目至我的最愛 請依照以下步驟添加項目至我的最愛: 1. 在鍵盤按下 鍵或在 BIOS 程序畫面中點擊 狀圖畫面。 2. 在設置樹狀圖畫面中選擇想要保存至我的最愛的 BIOS 項目。 來啟動設置樹 主菜單面板 已選擇的 快捷方式 項目 子菜單面板 刪除所有最 愛項目 點擊以恢復 更改 3. 從主菜單面板選擇項目,然後點擊子菜單中想要保存至我的最愛的選項,再點 擊或輕觸 或是按下 按鍵。 以下項目無法加入至我的最愛: 14 • 有子菜單的項目。 • 用戶手冊自訂項目,例如:語言、啟動設備順序。 • 設置項目,例如:內存 SPD 信息、系統時間與日期。 4. 點擊 Exit (ESC) 或按下 鍵來關閉樹狀圖窗口。 5.
4.
系統管理員密碼(Administrator Password) 當您設置系統管理員密碼後,建議您先登入系統管理員帳戶,以免 BIOS 設置程序中 的某些信息無法查看或更改設置。 設置系統管理員密碼 請依照以下步驟設置系統管理員密碼(Administrator Password): 1. 請選擇 Administrator Password 項目並按下 。 2. 由 Create New Password 窗口輸入欲設置的密碼,輸入完成按下 。 3. 請再一次輸入密碼以確認密碼正確。 更改系統管理員密碼 請依照以下步驟更改系統管理員密碼(Administrator Password): 1. 請選擇 Administrator Password 項目並按下 。 2. 由 Enter Current Password 窗口輸入密碼並按下 。 3. 由 Create New Password 窗口輸入新密碼,輸入完成按下 。 4.
5.
以下項目只有在 Ai Overclock Tuner 設置為 [Manual] 或 [ASUS Enhanced Memory Profile] 時才會出現。 BCLK Frequency 本項目用來設置 BCLK 頻率以增強系統性能,您可以使用 <+> 與 <-> 鍵調整數值。 建議您依照處理器規格設置數值,設置過高的數值可能造成處理器永久性的損害。 以下項目只有在 Ai Overclock Tuner 設置為 [ASUS Enhanced Memory Profile] 時 才會出現。 AEMP 本項目用來選擇 ASUS Enhanced Memory Profile(AEMP)技術。每個數據都有專 屬動態隨機存取內存(DRAM)頻率、時間與電壓。 ASUS MultiCore Enhancement [Auto - Lets BIOS Optimize] 通過華碩提供的 CPU 核心頻率設置,獲得最佳化的系 統超頻性能。 [Disabled - Enforce All limits] 本項目用來設置將默認的 CPU 核心倍頻。 [Enabled - Remove All limits] 本
DRAM Frequency 本項目可讓您設置內存的運行頻率。設置選項會隨著 BCLK Frequency 設置值變動。 選擇自動模式以應用最佳化設置。 設置值有:[Auto] [DDR5-800MHz] - [DDR5-13333MHz] Performance Core Ratio [Auto] 系統會自動調整所有性能核心比。 [Sync All Cores]設置核心比限制以同步所有性能核心。 [By Core Usage] 根據正在使用的性能核心數以設置性能核心比的限制。 [AI Optimized] 使用 AI 優化性能核心比。 • [AI Optimized] 項目只有在安裝沒有鎖頻的處理器時才會顯示 • 以下項目只有在 Performance Core Ratio 設置為 [Auto] [Sync All Cores] 或 [By Core Usage] 時才會出現。 Specific Performance Core Performance Core0-7 Specific Ratio Limit 為部分性能核心設置比率限制。您可以使用 <+> 與 <-> 鍵調整數值。 設置值:[
以下項目只有在 Performance Core Ratio 設置為 [Sync All Cores] 時才會出現。 ALL-Core Ratio Limit 本項目用來為所有處理器核心設置核心倍頻限制。使用 <+> / <-> 鍵調整設置值或輸 入 [Auto] 以應用最佳化設置值。 設置值:[Auto] [8] - [85] 以下項目只有在 Performance Core Ratio 設置為 [By Core Usage] 時才會出現。 1-Core Ratio Limit / 2-Core Ratio Limit / 3-Core Ratio Limit / 4-Core Ratio Limit / 5-Core Ratio Limit / 6-Core Ratio Limit / 7-Core Ratio Limit / 8-Core Ratio Limit N-core 比限制必須高於或等於(N+1)核心比限制。(N 代表 CPU 核心數)當核心 數小於 N 時,核心比限制不能設置為 [Auto]。您可以使用 <+> 與 <-> 鍵調整數值。 設置值:[Auto] [36] - [85] 以下
以下項目只有在 Efficient Core Group0 Specific Adaptive Voltage 設置為 [Adaptive Mode] 時才會出現。 Offset Mode Sign [+] 設置正數值偏移電壓。 [-] 設置負數值偏移電壓。 Efficient Core Group0 Offset 設置 CPU 核心電壓偏移值。您可以使用 <+> 與 <-> 鍵調整數值。數值範圍從 0.001 V 至 0.999 V,間隔為 0.001 V。 設置值:[Auto] [0.00100] - [0.99900] 您需要保存更改並重置系統以使其更改生效。 Additional Turbo Mode Efficient Group0 Voltage 設置在 Turbo 模式下運行時饋送到 CPU 核心的電壓量。設置高 CPU 核心頻 率時增加電壓。該電壓會受到偏移值的影響。您可以使用 <+> 與 <-> 鍵調整數 值。數值範圍從 0.250 V 至 1.920 V,間隔為 0.001 V。 設置值:[Auto] [0.25000] - [1.
AVX512 本項目用來開啟或關閉 AVX 512 命令。 設置值:[Auto] [Disabled] [Enabled] AVX512 只有在 E-Core 關閉時可使用。 AVX2 Ratio Offset to per-core Ratio Limit 設置值:[Auto] [User Specify] 以下項目只有在 AVX2 Ratio Offset to per-core Ratio Limit 設置為 [User Specify] 時才會出現。 AVX2 Ratio Offset 指定降低 AVX 比與每個核心比的 bin 數量。AVX 是一個壓力更大的工作負 載,降低 AVX 比率有助於確保 SSE 工作負載的最大可能比。使用 Mailbox MSR 0x150、cmd 0x1B。範圍 0-31。0=無偏移。您可以使用 <+> 與 <-> 鍵 調整數值。 設置值:[0] - [31] AVX2 Voltage Guardband Scale Factor 設置值:[Auto] [User Specify] 以下項目只有在 AVX2 Voltage Guardband Scale Facto
DRAM RAS# ACT Time 設置值:[Auto] [1] - [511] DRAM Command Rate 設置值:[Auto] [1N] [2N] [3N] [N:1] 以下項目當 DRAM Command Rate 設置為 [N:1] 時才會出現。 N to 1 ratio 每個有效命令周期之間的氣泡數量。 Configurations: [1] - [7] Secondary Timings DRAM RAS# to RAS# Delay L 設置值:[Auto] [1] - [63] DRAM RAS# to RAS# Delay S 設置值:[Auto] [1] - [127] DRAM REF Cycle Time 設置值:[Auto] [1] - [65535] DRAM REF Cycle Time 2 設置值:[Auto] [1] - [65535] DRAM REF Cycle Time Same Bank 設置值:[Auto] [1] - [1023] DRAM Refresh Interval 設置值:[Auto] [1] - [262143] DRAM WRITE Re
Skew Control DDRCRCOMPCTL0/1/2 Ctl0 dqvrefup 設置值:[Auto] [0] - [255] Ctl0 dqvrefdn 設置值:[Auto] [0] - [255] Ctl0 dqodtvrefup 設置值:[Auto] [0] - [255] Ctl0 dqodtvrefdn 設置值:[Auto] [0] - [255] Ctl1 cmdvrefup 設置值:[Auto] [0] - [255] Ctl1 ctlvrefup 設置值:[Auto] [0] - [255] Ctl1 clkvrefup 設置值:[Auto] [0] - [255] Ctl1 ckecsvrefup 設置值:[Auto] [0] - [255] Ctl2 cmdvrefup 設置值:[Auto] [0] - [255] Ctl2 ctlvrefdn 設置值:[Auto] [0] - [255] Ctl2 clkvrefdn 設置值:[Auto] [0] - [255] Tc Odt Control ODT_READ_DURATION 設置值:[Auto] [0] - [7] ODT_R
DQ RTT NOM WR 設置值:[0 DRAM Clock] [34 DRAM Clock] [40 DRAM Clock] [48 DRAM Clock] [60 DRAM Clock] [80 DRAM Clock] [120 DRAM Clock] [240 DRAM Clock] DQ RTT PARK 設置值:[0 DRAM Clock] [34 DRAM Clock] [40 DRAM Clock] [48 DRAM Clock] [60 DRAM Clock] [80 DRAM Clock] [120 DRAM Clock] [240 DRAM Clock] DQ RTT PARK DQS 設置值:[0 DRAM Clock] [34 DRAM Clock] [40 DRAM Clock] [48 DRAM Clock] [60 DRAM Clock] [80 DRAM Clock] [120 DRAM Clock] [240 DRAM Clock] GroupA CA ODT 設置值:[0 DRAM Clock] [40 DRAM Clock] [60 DRAM Clock] [80 DR
Round Trip Latency MC0-1 CHA-B R0-7 設置值:[Auto] [0] - [255] Memory Training Algorithms 本菜單的項目用來讓您開啟或關閉不同的內存訓練演算法。 Early Command Training 設置值:[Auto] [Enabled] [Disabled] SenseAmp Offset Training 設置值:[Auto] [Enabled] [Disabled] Early ReadMPR Timing Centering 2D 設置值:[Auto] [Enabled] [Disabled] Read MPR Training 設置值:[Auto] [Enabled] [Disabled] Receive Enable Training 設置值:[Auto] [Enabled] [Disabled] Jedec Write Leveling 設置值:[Auto] [Enabled] [Disabled] Early Write Timing Centering 2D 設置值:[Auto] [Disabled] [Enabled
Write Timing Centering 2D 設置值:[Auto] [Disabled] [Enabled] Read Timing Centering 2D 設置值:[Auto] [Disabled] [Enabled] Command Voltage Centering 設置值:[Auto] [Disabled] [Enabled] Early Command Voltage Centering 設置值:[Auto] [Disabled] [Enabled] Write Voltage Centering 2D 設置值:[Auto] [Disabled] [Enabled] Read Voltage Centering 2D 設置值:[Auto] [Disabled] [Enabled] Late Command Training 設置值:[Disabled] [Enabled] [Auto] Round Trip Latency 設置值:[Auto] [Disabled] [Enabled] Turn Around Timing Training 設置值:[Auto] [Disabled] [En
DIMM DFE Training 設置值:[Auto] [Disabled] [Enabled] Tx Dqs Dcc Training 設置值:[Auto] [Disabled] [Enabled] Rank Margin Tool 設置值:[Auto] [Disabled] [Enabled] Memory Test 設置值:[Auto] [Disabled] [Enabled] DIMM SPD Alias Test 設置值:[Auto] [Disabled] [Enabled] Receive Enable Centering 1D 設置值:[Auto] [Disabled] [Enabled] Retrain Margin Check 設置值:[Auto] [Disabled] [Enabled] Write Drive Strength Up/Dn independently 設置值:[Auto] [Disabled] [Enabled] Margin Check Limit 設置值:[Disabled] [L1] [L2] [Both] 以下項目當 Margin Check Limit 設置為
tWRRD_dg 設置值:[Auto] [0] - [511] tRDRD_dr 設置值:[Auto] [0] - [255] tRDRD_dd 設置值:[Auto] [0] - [255] tRDWR_dr 設置值:[Auto] [0] - [255] tRDWR_dd 設置值:[Auto] [0] - [255] tWRWR_dr 設置值:[Auto] [0] - [127] tWRWR_dd 設置值:[Auto] [0] - [255] tWRRD_dr 設置值:[Auto] [0] - [127] tWRRD_dd 設置值:[Auto] [0] - [127] tWRPRE 設置值:[Auto] [0] - [1023] tPRPDEN 設置值:[Auto] [0] - [31] tRDPDEN 設置值:[Auto] [0] - [255] tWRPDEN 設置值:[Auto] [0] - [1023] tCPDED 設置值:[Auto] [0] - [31] tREFIX9 設置值:[Auto] [0] - [255] Ref Interval 設置值:[Auto] [0] - [8191] tXP
tCCD_L_tDLLK 設置值:[Auto] [0] - [15] Misc.
Configure Memory Dynamic Frequency Switching 以下項目當 Realtime Memory Frequency 設置為 [Disabled] 時才會出現。 Dynamic Memory Boost 本項目用來開啟或關閉 Dynamic Memory Boost 功能。可以讓您在 默認的 SPD 設置文件頻率與選擇的 XMP 文件頻率間自動切換。只 有當選擇 XMP 設置文件時才可使用。 設置值:[Disabled] [Enabled] 以下項目當 Dynamic Memory Boost 設置為 [Disabled] 時才會出現。 Realtime Memory Frequency 本項目用來開啟或關閉 Memory Frequency 功能。可以讓您在默認 的 SPD 設置文件頻率與選擇的 XMP 文件頻率間自動切換。只有當 選擇 XMP 設置文件時才可使用。 設置值:[Disabled] [Enabled] SA GV System Agent Geyserville(系統代理 Geyserville)。本項目可以停 用、固定至特定點或啟用頻率切換。若為啟用,
Digi+ VRM VRM Initialization Check 當 VRM 初始化過程中出現任何錯誤時,若啟用此功能,系統將於 POST 代碼 76/77 處。 設置值:[Disabled] [Enabled] CPU Input Voltage Load-line Calibration 設置值:[Auto] [Level 1] [Level 2] [Level 3] CPU Load-line Calibration Load-line 是根據 Intel 所訂立之 VRM 規格,其設置值將影響 CPU 電壓。CPU 運行電壓將依 CPU 的負載呈比例性遞減,當您將此項目的設置值設置越高時, 將可提高電壓值與超頻能力,但會增加 CPU 與 VRM 的溫度。從 1-7 中選擇 一個等級來調整負載線斜率。等級 1 代表更大的 VDroop,等級 7 代表最小 VDroop。 設置值:[Auto] [Level 1] [Level 2] [Level 3] [Level 4:Recommended for OC] [Level 5] [Level 6] [Level 7] 實際提升的性能視 CPU 型號而
以下項目當 CPU VRM Switching Frequency 設置為 [Manual] 時才會出現。 Fixed CPU VRM Switching Frequency(KHz) 本項目可讓您設置固定的 VRM 頻率。請使用 <+> 與 <-> 鍵調整數值。數值以 50kHz 為間隔,更改的範圍由 250kHz 至 500kHz。 以下項目當 CPU VRM Switching Frequency 設置為 [Auto] 時才會出現。 VRM Spread Spectrum 本項目可讓您啟動 VRM Spread Spectrum 項目以增加系統穩定性。啟用本項 目可減少峰值噪聲;超頻時關閉此設置。 設置值:[Auto] [Disabled] [Enabled] CPU Power Duty Control 本項目可讓您根據電流與/或溫度來調整每個 VRM 相位的占空比。 [T.
以下項目只有在使用內置顯卡時會出現。 CPU Graphics Load-line Calibration Load-line 是根據 Intel 所訂立之 VRM 規格,其設置值將影響繪圖處理器電壓。 繪圖處理器運行電壓將依繪圖處理器的負載呈比例性遞減。從 1 至 8 等級中選 擇,以將處理器圖形電源電壓從 100% 調整至 0%。 設置值:[Auto] [Level 1] [Level 2] [Level 3] [Level 4:Recommended for OC] [Level 5] [Level 6] [Level 7] 實際提升的性能視 CPU 型號而異。請勿移除散熱模塊。 CPU Graphics VRM Switching Frequency 本項目會影響繪圖處理器暫態響應速度與元件溫度的生成。選擇 [Manual] 設置 較高的頻率可以獲得較快的暫態響應速度。 設置值:[Auto] [Manual] 請勿當項目設置為 [Manual] 時將散熱系統移除,散熱環境需受到監控。 以下項目當 CPU Graphics VRM Switching Frequency 設置為 [Manual]
Memory Controller Boot Voltage 本項目讓您首次啟動時設置內存控制器電壓。 設置值:[Auto] [1.00000] - [2.00000] Auto Voltage Caps CPU Core Auto Voltage Cap 將此設置為特定值將為 CPU 核心自動電壓設置上限。未處於手動模式時,其有 效性受其他因素影響,如 AC/DC 負載線值與 CPU 的本機 VID。 設置值:[Auto] [0.60000] - [1.70000] CPU Input Auto Voltage Cap 將此設置為特定值將為 CPU 輸入自動電壓設置上限。 設置值:[Auto] [1.50000] - [2.10000] Memory Controller Auto Voltage Cap 將此設置為特定值將為內存控制器自動電壓設置上限。 設置值:[Auto] [1.00000] - [2.
CPU Core/Cache Current Limit Max. 本項目可讓您設置更高的電流限制以防止超頻時的頻率或功率節流。可以設置 為最大值(511.75)以防止超頻時節流。 設置值:[Auto] [0.00] - [511.75] CPU Graphics Current Limit 本項目可讓您設置較高的 CPU Graphics 電流限制以避免超頻時啟動頻率或電 力保護。 設置值:[Auto] [0.00] - [511.
SA CEP Enable 本項目用來開啟或關閉 SA CEP(電流偏移保護)支援。使用 pCode Mailbox 命令 0x37,次命令 0x1。將 Databit3 設置為 1。 設置值:[Auto] [Disabled] [Enabled] IA SoC Iccmax Reactive Protector 設置值:[Auto] [Disabled] [Enabled] Inverse Temperature Dependency Throttle 設置值:[Auto] [Disabled] [Enabled] IA VR Voltage Limit 電壓限制(VMAX)。該數值表示在任何給定時間可允許的最大瞬間電壓。範 圍是 0 - 7999mV。使用 BIOS VR mailbox 命令 0x8。 設置值:[Auto] [0] - [7999] Thermal Velocity Boost TVB Voltage Optimizations 本項目用來控制 Intel Thermal Velocity Boost(TVB)功能。默認值為 [Enabled]。使用 Overclocking Mail
以下項目當 1-Core Active、2-Core Active、3-Core Active、4-Core Active、5Core Active 或 6-Core Active 設置為 [Enabled] 時才會出現。 Temperature A 超過此溫度臨界值的封裝將使用 Negative Ratio Offset A 中的負比率偏移。本 項目的度量單位為攝氏度。 設置值:[Auto] [1] - [115] Negative Ratio Offset A 當封裝溫度上升到 Temperature A 中指定的臨界值以上時,這將是各頻率的潛 在負偏移值。 設置值:[Auto] [User Specify] 以下項目當 Negative Ratio Offset A 設置為 [User Specify] 時才會出現。 Ratio Offset 使用 <+> 與 <-> 鍵來調整數值。 設置值:[0] - [31] Temperature B 超過此溫度臨界值的封裝將使用 Negative Ratio Offset B 中的負比率偏移。本 項目的度量單位為攝氏度。 設置值:[Auto] [1] - [
SPD Write Disable 本項目用來開啟或關閉設置 SPD 寫入禁止。為了安全考量,SPD 寫入禁止位 必須設置。 設置值:[TRUE] [FALSE] PVD Ratio Threshold 對於 Core Domain PLL,切換至較低後分頻器的臨界值默認為 15。當推高 BCLK 時,您可以設置一個低於 15 的值,以例數位控制振盪器(DCO)維持 在合理的頻率。 設置值:[Auto] [1] - [40] Banding Ratio 使用 <+> 與 <-> 鍵來調整數值。 設置值:[Auto] [0] - [120] SA PLL Frequency Override 本項目用來設置 Sa PLL Frequency。 設置值:[Auto] [3200 MHz] [1600 MHz] BCLK TSC HW Fixup 本項目用來開啟或關閉 BCLK TSC HW Fixup 在 TSC 從 PMA 複製至 APIC 期 間停用。 設置值:[Enabled] [Disabled] Core Ratio Extension Mode 本項目用來開啟或關閉 Core Ratio Above
Memory Controller PLL Voltage 本項目用來設置 Memory Controller PLL VCC Trim 的電壓偏移。數值以 0.015V 為間隔,更改的範圍由 0.900V 至 1.845V。 設置值:[Auto] [0.90000] - [1.84500] CPU 1.8V Small Rail 本項目用來設置 CPU 1.8V Small Rail 的電壓偏移。數值以 0.010V 為間隔,更 改的範圍由 1.500V 至 2.300V。 設置值:[Auto] [1.50000] - [2.30000] PLL Termination Voltage 本項目用來設置 PLL Termination 的電壓偏移。數值以 0.010V 為間隔,更改 的範圍由 0.800V 至 1.800V。 設置值:[Auto] [0.80000V] - [1.80000V] CPU Standby Voltage 本項目用來設置 CPU Standby 的電壓偏移。數值以 0.010V 為間隔,更改的範 圍由 0.800V 至 1.800V。 設置值:[Auto] [0.
以下項目當 Cooler Efficiency Customize 設置為 [User Specify] 時才會出現。 Cooler Score 冷卻器的 pts 值。[最高] 250 pts; [最低] 1 pts; [默認] 125 pts。 設置值:[1] - [250] Recalibrate Cooler 本項目用來讓您重新校準冷卻器效率。 Cooler Re-evaluation Algorithm 本項目用來重新設置如何評估更新程度。 設置值:[Normal] [More inclined to update] [Very inclined to update] [Less inclined to update] [Least inclined to update] Optimism Scale 本項目用來設置預測的樂觀度。數值越高,代表預測越樂觀,反之亦然。 設置值:[50] - [150] Ring Down Bin 本項目用來開啟或關閉 Ring DownBin 功能。默認為 [Enabled]。使用 OC mailbox 命 令 0x19。 [Auto] 設置為默認值。 [Dis
Extreme Over-voltage 關閉本項目可以保護處理器不因過高的電壓而燒毀。當本項目設置為 [Enabled] 時, 您可以選擇較高層級的電壓來進行超頻,但可能會降低處理器的使用壽命。 設置值:[Disabled] [Enabled] BCLK Aware Adaptive Voltage 本功能啟用時,當計算處理器 V/F 曲線時,pcode 會察覺到 BCLK 頻率,在 BCLK 超頻時可避免高電壓覆寫。使用 OC Mailbox 命令 0x15。 設置值:[Disabled] [Enabled] CPU Core/Cache Voltage 設置提供處理器核心的電壓模式。手動模式可以讓您用戶定義數值。偏移模式通過 SVID 修改數值。 設置值:[Auto] [Manual Mode] [Offset Mode] 以下項目只有在 CPU Core/Cache Voltage 設置為 [Manual Mode] 時才會出現。 CPU Core Voltage Override 本項目用來設置處理器核心電壓覆寫。使用 <+> 與 <-> 來調整數值。數值以 0.
以下項目只有在 CPU Graphics Voltage 設置為 [Offset Mode] 時才會出現。 Offset Mode Sign [+] 設置正數值偏移電壓。 [-] 設置負數值偏移電壓。 CPU Graphics Voltage Offset 本項目用來設置處理器顯卡電壓偏移值。使用 <+> 與 <-> 來調整數值。數值以 0.005V 為間隔,更改的範圍由 0.005V 至 0.635V。 設置值:[Auto] [0.00500] - [0.63500] 您需要保存更改並重置系統以使其更改生效。 CPU L2 Voltage 本項目用來設置 CPU L2 的電壓。這可能有助於維持高時鐘速度。 設置值:[Auto] [Manual Mode] [Adaptive Mode] 以下項目只有在 CPU L2 Voltage 設置為 [Manual Mode] 時才會出現。 CPU L2 Voltage Override 本項目用來設置 CPU L2 的電壓。使用 <+> 與 <-> 來調整數值。數值以 0.001V 為 間隔,,更改的範圍由 0.700V 至 1.
CPU System Agent Voltage 本項目用來設置 CPU System Agent 的電壓。 設置值:[Auto] [Manual Mode] [Offset Mode] 以下項目只有在 CPU System Agent Voltage 設置為 [Manual Mode] 時才會出現。 CPU System Agent Voltage Override 本項目用來讓您通過外部電壓調節器為處理器輸入電壓。使用 <+> 與 <-> 來調整數 值。數值以 0.001V 為間隔,更改的範圍由 0.700V 至 1.800V。 設置值:[Auto] [0.70000] - [1.80000] 以下項目只有在 CPU System Agent Voltage 設置為 [Offset Mode] 時才會出現。 CPU System Agent Voltage Offset 本項目用來設置 CPU System Agent 的電壓偏移量。使用 <+> 與 <-> 來調整數值。 數值以 0.001V 為間隔,更改的範圍由 0.001V 至 0.999V。 設置值:[Auto] [0.00100] - [0.
Advanced Memory Voltages IVR Transmitter VDDQ Voltage 本項目用來為內存控制器的內置發送器電壓設置電壓。使用 <+> 與 <-> 來調整 數值。數值以 0.005V 為間隔,更改的範圍由 0.700V 至 2.200V。 設置值:[Auto] [0.70000] - [2.20000] Memory Controller Voltage 本項目用來設置內存控制器的電壓。使用 <+> 與 <-> 來調整數值。數值以 0.00625V 為間隔,更改的範圍由 1.000V 至 2.000V。 設置值:[Auto] [1.00000] - [2.00000] PMIC Voltages 設置值:[Auto] [Sync All PMICs] [By per PMIC] 以下項目只有在 PMIC Voltages 設置為 [Sync All PMICs] 時才會出現。 SPD HUB VLDO (1.8V) 本項目用來設置 SPD Hub Logic 的主電源。默認值為 1.8V。使用 <+> 與 <-> 來調整數值。數值以 0.100V 為間隔,更改的範圍由 1.
Memory VDDQ Switching Frequency 本項目用來以 MHz 為單位設置 VDDQ 穩壓器的開關頻率。使用 <+> 與 <-> 來調整數值。數值以 0.250MHz 為間隔,更改的範圍由 0.750MHz 至 1.500MHz。 設置值:[Auto] [0.75000] - [1.50000] Memory VPP Switching Frequency 本項目用來以 MHz 為單位設置 VPP 穩壓器的開關頻率。使用 <+> 與 <-> 來調整數值。數值以 0.250MHz 為間隔,更改的範圍由 0.750MHz 至 1.500MHz。 設置值:[Auto] [0.75000] - [1.50000] Memory Current Capability 本項目用來以安培為單位設置開關穩壓器的電流。使用 <+> 與 <-> 來調整數 值。數值以 0.125A 為間隔,更改的範圍由 0.125A 至 6.000A。 設置值:[Auto] [0.12500] - [6.
PMIC0-3 Memory VDDQ Switching Frequency 本項目用來以 MHz 為單位設置 VDDQ 穩壓器的開關頻率。使用 <+> 與 <-> 來調整數值。數值以 0.250MHz 為間隔,更改的範圍由 0.750MHz 至 1.500MHz。 設置值:[Auto] [0.75000] - [1.50000] PMIC0-3 Memory VPP Switching Frequency 本項目用來以 MHz 為單位設置 VPP 穩壓器的開關頻率。使用 <+> 與 <-> 來調整數值。數值以 0.250MHz 為間隔,更改的範圍由 0.750MHz 至 1.500MHz。 設置值:[Auto] [0.75000] - [1.50000] PMIC0-3 Memory Current Capability 本項目用來以安培為單位設置開關穩壓器的電流。使用 <+> 與 <-> 來調整數 值。數值以 0.125A 為間隔,更改的範圍由 0.125A 至 6.000A。 設置值:[Auto] [0.12500] - [6.
6 高級菜單(Advanced menu) 高級菜單可讓您改變中央處理器與其他系統設備的細部設置。 在您設置本高級菜單的設置時,不正確的數值將導致系統丟失。 48 PRIME / ProArt / TUF GAMING Intel 600 系列 BIOS 用戶手冊
6.
SA - PCI Express DMI Link ASPM Control 本項目用來設置 DMI Link 上 CPU 與 PCH 的 ASPM(Active State Power Management)功能。在 CPU 與 PCH 中的 ASPM Control 都要設置為啟動才能使 ASPM 功能生效。 設置值有:[Disabled] [L0s] [L1] [L0sL1] PEG - ASPM 本項目用來控制 PEG 0 的 ASPM 支持。若 PEG 不是當前使用的設備則無效。 設置值有:[Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1] PCI Express Clock Gating 本項目用來開啟或關閉每個連接端口的 PCI Express Clock Gating。 設置值有:[Disabled] [Enabled] 6.
Hardware Prefetcher 本項目可以讓處理器在 L2 Cache 進行預取反饋和數據,從而降低內存負荷時間,改 善系統性能。 設置值有:[Disabled] [Enabled] Adjacent Cache Line Prefetcher 本項目可以讓 L2 Cache 的中間緩存線運行相鄰緩存線預取功能,從而降低內存負荷 時間,改善系統性能。 設置值有:[Disabled] [Enabled] Intel (VMX) Virtualization Technology 當本項目設為 [Enabled] 時,啟動 Intel 虛擬技術(Virtualization Technology),讓 硬件平台可以同時運行多個操作系統。 設置值有:[Disabled] [Enabled] Active Processor Cores 本項目可讓您設置在每個處理封包中啟用的處理器核心數量。 設置值有:[All] [1] - [3] Hyper-Threading 啟動本項目可以讓高速運行緒處理器在操作系統內作為兩個邏輯處理器,允許操作系 統同時處理二個運行緒或處理器。 設置值有:[Enabled]
Turbo Mode 本項目用來設置核心處理器的速度,使其在運行電力、電流與溫度條件限制 下,可以比基本運行頻率更快的速度運行。 設置值有:[Disabled] [Enabled] Acoustic Noise Settings 本子菜單中的項目可以讓您為 IA、GT 與 SA 域設置聲學噪聲設置。 Acoustic Noise Settings Acoustic Noise Mitigation 當 CPU 處於更深的 C 狀態時,啟用此選項將有助於減輕某些 SKU 上的噪音。 設置值:[Disabled] [Enabled] 以下項目只有在 Acoustic Noise Mitigation 設置為 [Enabled] 時才會出現。 Pre Wake Time 本項目讓您以 micro ticks 為單位設置最大 Pre Wake 隨機分派時 間。 這是為了減輕聲學噪聲動態週期性改變 (DPA) 調整。使用 <+> 與 <-> 來調整數值。 設置值:[0] - [255] Ramp Up Time 本項目讓您以 micro ticks 為單位設置最大 Ramp Up 隨機分派時 間。使用 <+> 與 <
Slow Slew Rate for IA Domain 為深封裝 C-state 緩衝時間設置 VR IA 慢速電壓轉換速率;慢速電 壓轉換速率等於快速除以數字,數字為 2、4、8 以減慢擺率以幫助 最大限度地減少噪聲。 設置值:[Fast/2] [Fast/4] [Fast/8] GT VR Domain Disable Fast PKG C State Ramp for GT Domain 需要設置本項目以減少更深 C-state 期間的噪聲。 [FALSE] 請勿在更深的 C-state 期間停用 Fast ramp。 [TRUE] 在更深的 C-state 期間停用 Fast ramp。 Slow Slew Rate for GT Domain 為深封裝 C-state 緩衝時間設置 VR GT 慢速電壓轉換速率;慢速電 壓轉換速率等於快速除以數字,數字為 2、4、8 以減慢速率以幫助 最大限度地減少噪聲。 設置值:[Fast/2] [Fast/4] [Fast/8] CPU C-states 本項目用來開啟或關閉 CPU 電源節能。允許 CPU 在未 100% 使用時進入 C-state。 設置值
6.
DVMT Pre-Allocated 本項目用來選擇內部顯卡設備使用的 DVMT 5.
PCIEX16_2 Link Speed 本項目用來設置 PCIEX16_2 插槽。 設置值:[Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5] 6.4 PCH 設置(PCH Configuration) PCI Express Configuration 本項目用來管理與設置 PCI Express 插槽。. 此子菜單中的項目可能因您的主板而異。關於實際設置與選項,請參考主板的 BIOS。 PCIEX16_3(G3) Link Speed 本項目用來設置 PCIEX16_3(G3) 插槽。 設置值:[Auto] [Gen1] [Gen2] [Gen3] M.2_4 Link Speed 本項目用來設置 M.2_4 插槽。 設置值:[Auto] [Gen1] [Gen2] [Gen3] [Gen4] M.2_2 Link Speed 本項目用來設置 M.2_2 插槽。 設置值:[Auto] [Gen1] [Gen2] [Gen3] [Gen4] M.2_3 Link Speed 本項目用來設置 M.
6.5 PCH 存儲設備設置(PCH Storage Configuration) 當您進入 BIOS 設置程序時,BIOS 設置程序將自動檢測已安裝的 SATA 設備。當未 偵側到 SATA 設備時將顯示 Empty。 將滾動條往下滾動來顯示以下項目。 SATA Controller(s) 本項目可開啟或關閉內置的 SATA 設備。 設置值有:[Disabled] [Enabled] 以下項目只有在 SATA Controller(s) 設置為 [Enabled] 時才會出現。 Aggressive LPM support 本項目為 LPM(鏈接電源管理,link power management)設計,支援更好的能源節 省。設置為關閉時,SATA 連接端口的熱插拔功能也會關閉。 設置值有:[Disabled] [Enabled] SMART Self Test S.M.A.R.T.
6.6 PCH-FW 設置(PCH-FW Configuration) 本項目可讓您設置 TPM 固件。 PTT 本項目用來開啟或關閉 SkuMgr 中的 PTT。 設置值有:[Disabled] [Enabled] 6.
以下項目只有在 Discrete Thunderbolt(TM) Support設置為 [Enabled] 時才會出現。 Wake From Thunderbolt(TM) Devices 本項目可以開啟或關閉 Thunderbolt(TM) 設備的系統喚醒。 設置值有:[On] [Off] Discrete Thunderbolt(TM) Configuration 本子菜單中的項目可以讓您配設置 Discrete Thunderbolt (TM) 相關設置。 DTBT Go2Sx Command 本項目用來啟用在系統進入 Sx 時將 DTBT 置於 Sx 狀態的命令。 設置值:[Disabled] [Enabled] Windows 10 Thunderbolt Support 本項目可以讓您指定 Windows 10 Thunderbolt 支援等級。 [Enable + RTD3] OS Native support plus RTD3. [Disabled] No OS native support.
6.
6.
6.10 網絡協定堆棧設置(Network Stack Configuration) 該菜單中的項目可能會因您的主板不同而異。 Network stack 本項目用來啟動或關閉 UEFI 網絡協定堆棧(network stack)功能。 設置值有:[Disable] [Enable] 以下選項只有在 Network Stack 設置為 [Enabled] 時才會出現。 Ipv4/Ipv6 PXE Support 本項目用來啟動或關閉 Ipv4/Ipv6 PXE 啟動選項。 設置值有:[Disabled] [Enabled] 6.
6.12 HDD/SSD SMART 信息 本菜單顯示已鏈接設備的 SMART information。 NVM Express 設備未支持SMART information。 6.
Power On By PCI-E 本項目用來啟動或關閉內置網絡控制器或其他安裝的 PCI-E 網卡的喚醒功能。 設置值:[Disabled] [Enabled] Power On By RTC 本項目用來關閉或開啟實時時鐘(RTC)喚醒功能,啟用時,您可自行設置天、小 時、分、秒以安排時間讓系統自動啟動。 設置值:[Disabled] [Enabled] 6.
USB power delivery in Soft Off state (S5) 本項目用來當您的電腦處於 S5 狀態時開啟或關閉 USB 電源。 設置值有:[Disabled] [Enabled] Connectivity mode (Wi-Fi & Bluetooth) 本項目用來開啟或關閉 Wi-Fi 與藍牙連接模塊。 設置值:[Disabled] [Enabled] LED lighting 系統在工作狀態時 當系統在工作狀態時,本項目用來關閉或開啟 RGB LED 指示燈。 [All On] 所有 RGB 指示燈與功能指示燈將開啟。 [Stealth Mode] 所有 RGB 指示燈與功能指示燈將關閉。 [Aura Only] RGB 指示燈將開啟,功能指示燈將關閉。 [Aura Off] 功能指示燈將開啟,RGB 指示燈將關閉。 RGB 接口與可定址 RGB 接口僅在 S0(運行)狀態下運行。 系統在睡眠、休眠或軟關機狀態時 本項目用來在睡眠、休眠與軟關機狀態下開啟或關閉 RGB LED 指示燈。 [All On] 所有指示燈正常運行。 [Stealth Mode] 所有指示
Serial Port 本項目用來開啟或關閉串口。 設置值:[Enabled] [Disabled] 以下選項只有在 Serial Port 設置為 [Enabled] 時才會出現。 Change settings 本項目用來為 Super I/O 設備選擇一個最佳設置。 設置值:[IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] 6.
7.
Voltage and Current Monitor CPU Core Voltage, 12V Voltage, 5V Voltage, 3.3V Voltage, Memory Controller Voltage [x.
以下的項目只有在 CPU Fan Profile 設置為 [Standard]、[Silent]、[Turbo] 或 [Manual] 時才會出現。 CPU Fan Step Up 本項目用來設置處理器風扇的加速。等級 0 是速度的瞬時變化。等級越高,速 度變化越慢,也可能導致噪音更小,但這也會導致散熱速度更慢。 設置值:[Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] CPU Fan Step Down 本項目用來設置處理器風扇的減速。等級 0 是速度的瞬時變化。等級越高,速 度變化越慢,也可能導致噪音更小,但這也會導致散熱速度更慢。 設置值:[Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] CPU Fan Speed Low Limit 本項目用來設置處理器風扇的最低速度警告值。當達到這個最低速度時,會出 現警告信息。若設置為 [Ignore],將不會再出現警告信息。 設置值:[Ignore] [200 RPM] [300 RPM] [400 RPM] [500 R
CPU Fan Middle. Duty Cycle (%) 本項目用來設置當溫度源溫度高於中間溫度時,風扇的中間占空比。當溫度源 溫度高於中間限制時,處理器風扇將以中間占空比運行。建議您當處理器溫度 超過 75°C 時,將風扇/水泵的占空比設為 100%。請注意:當風扇/水泵占空 比不足導致過熱,會造成處理器性能限制。使用 <+> 或 <-> 鍵調整處理器的中 間占空比。 CPU Fan Lower Temperature 本項目用來設置處理器最低溫度。當處理器溫度低於下限時,處理器風扇會以 最小占空比運行。建議您當處理器溫度超過 75°C 時,將風扇/水泵的占空比設 為 100%。請注意:當風扇/水泵占空比不足導致過熱,會造成處理器性能限 制。使用 <+> 或 <-> 鍵調整處理器的最低溫度。 CPU Fan Min.
Chassis Fan 1-5 Step Up 本項目用來設置機箱風扇的加速。等級 0 是速度的瞬時變化。等級 越高,速度變化越慢,也可能導致噪音更小,但這也會導致散熱速 度更慢。 設置值:[Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] Chassis Fan 1-5 Step Down 本項目用來設置處理器風扇的減速。等級 0 是速度的瞬時變化。等 級越高,速度變化越慢,也可能導致噪音更小,但這也會導致散熱 速度更慢。 設置值:[Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] Chassis Fan 1-5 Speed Low Limit 本項目用來設置處理器風扇的最低速度警告值。當達到這個最低速度 時,會出現警告信息。若設置為 [Ignore],將不會再出現警告信息。 設置值:[Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] 以下項目只有在 Chassis Fan 1-5 Profile 設為 [M
Chassis Fan 1-5 Min.
AIO Pump Speed Low Limit 本項目用來設置 AIO PUMP 風扇的最低速度警告。當達到這個最低速度時,會 出現警告信息。若設置為 [Ignore],將不會再出現警告信息。 設置值:[Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] 以下的項目只有在 AIO Pump Profile 設置為 [Manual] 時才會出現。 AIO Pump Upper Temperature 本項目用來設置 AIO PUMP 溫度上限。當溫度源溫度高於上限時,AIO PUMP 風扇會以最大占空比運行。建議您當處理器溫度超過 75°C 時,將風扇/水泵的 占空比設為 100%。請注意:當風扇/水泵占空比不足導致過熱,會造成處理器 性能限制。使用 <+> 或 <-> 鍵調整處理器的最高溫度。 溫度上限不能低於溫度下限。 AIO Pump Max.
Chassis Intrusion Detection Support 當本項目設置為 [Enabled] 時可啟用機箱檢測功能。 設置值:[Enabled] [Disabled] 74 PRIME / ProArt / TUF GAMING Intel 600 系列 BIOS 用戶手冊
8.
Boot from Storage Devices 本項目用來選擇想要運行的存儲設備類型。 設置值:[Ignore] [Legacy only] [UEFI only] Boot from PCI-E/PCI Expansion Devices 本項目用來選擇想要運行的 PCI-E/PCI 擴展設備類型。 設置值:[Ignore] [Legacy only] [UEFI only] Secure Boot 本項目用來設置 Windows® 安全啟動的相關參數以及管理系統金鑰,以提升系統在開 機自檢(POST)時的安全性,避免受到未授權的用戶與惡意軟件的危害。 OS Type [Windows UEFI Mode] 本項目用來選擇安裝的作業系統。運行 Microsoft® 安全啟動檢查。只有在 Windows® UEFI 模式或其他 Microsoft® 安全啟動兼容作業系統中啟動時選擇此 項目。 [Other OS] 在 Windo w s ® 非 U E F I 模 式 中 啟 動 時 獲 得 最 佳 功 能 。 Microsoft® 安全啟動功能僅可在 Windows® UEFI 模式下正確運行。
Set New key 本項目用來由 USB 存儲設備載入已下載的平台金鑰(PK)。 Delete key 本項目用來刪除系統中的平台金鑰(PK),當平台金鑰刪除後即無 法使用安全啟動金鑰。 設置值有:[Yes] [No] PK 文件必須格式化為一個基於時間認證變量的 UEFI 變量結構。 KEK Management KEK(金鑰交換金鑰 [Key-exchange Key] 或金鑰註冊金鑰 [Key-Enrollment Key])用來管理簽名數據庫(db)與撤銷簽名數據庫(dbx)。 Key-exchange Key(KEK)指的是 Microsoft® Secure Boot Key-Enrollment Key(KEK)。 Save to file 本項目用來保存系統中的 KEK 至 USB 存儲設備中。 Set New key 本項目用來由 USB 存儲設備載入已下載 KEK。 Append Key 本項目用來由存儲設備載入附加的 KEK,以管理附加的簽名數據庫 (db)與撤銷簽名數據庫(dbx)。 Delete key 本項目用來刪除系統中的 KEK。 設置值有:[Yes] [No] KEK
DBX Management dbx(撤銷簽名數據庫)列出 db 項目中不再被信任且無法被載入之被禁止的圖 片圖像。 Save to file 本項目用來保存系統中的 dbx 至 USB 存儲設備中。 Set New key 本項目用來由 USB 存儲設備載入已下載的 dbx。 Append Key 本項目用來由存儲設備載入附加的撤銷簽名數據庫(dbx),以使更 多的 db 圖片圖像無法被載入。 Delete key 本項目用來刪除系統中的 dbx 文件。 設置值:[Yes] [No] dbx 文件必須格式化為一個基於時間認證變數的 UEFI 變數結構。 Boot Configuration Fast Boot [Disabled] [Enabled] 系統返回正常啟動速度。 加速系統啟動速度。 以下項目只有在 Fast Boot 設置為 [Enabled] 時才會出現。 Next Boot after AC Power Loss Normal Boot] [Fast Boot] 電源中斷後,在下一次啟動時恢復至正常啟動速度。 電源中斷後,在下一次啟動時加快啟動速度。 Boot Logo Disp
以下項目只有在 Boot Logo Display 設置為 [Disabled] 時才會出現。 Post Report 本項目可以讓您選擇 POST 的等候時間或直到按下 ESC。 設置值:[1 sec] - [10 sec] [Until Press ESC] Boot up NumLock State 本項目可以選擇鍵盤 NumLock 狀態。 設置值:[On] [Off] Wait For ‘F1’ If Error 系統啟動過程出現錯誤信息時,本項目可讓系統等待您按下 鍵確認才會 繼續進行啟動程序。 設置值:[Disabled] [Enabled] Option ROM Messages [Force BIOS] 選購設備固件信息會在開機自檢時顯示。 [Keep Current] 在開機自檢時關閉選購設備固件信息並只顯示華碩啟動圖 標。 Interrupt 19 Capture 本項目用來開啟或關閉 option ROM 以捕獲中斷 19。 設置值:[Enabled] [Disabled] AMI Native NVMe Driver Support 本項目用來開啟或關閉 AMI Nat
Boot Option Priorities 本項目讓您自行選擇啟動磁盤並排列啟動設備順序。屏幕上顯示的設備項目數量將視 系統中安裝的設備數量而定。 • 欲進入 Windows OS 安全模式時,請在啟動自檢(POST)時按下 (Windows 8 不支持這項功能)。 • 啟動時您可以在 ASUS Logo 出現時按下 選擇啟動設備。 Boot Override 本項目將顯示可使用的設備,設備的名稱將因使用的硬件設備不同而有所差異。點擊 任一設備可將該將置設置為啟動設備。 80 PRIME / ProArt / TUF GAMING Intel 600 系列 BIOS 用戶手冊
9.
9.1 華碩 EZ Flash 3 應用程序(ASUS EZ Flash 3 Utility) 本項目可以讓您啟動華碩 EZ Flash 3 程序,按下 會出現再次確認的窗口, 請使用左右方向鍵選擇 [Yes] 或 [No],接著按下 確認。 請參考 華碩 EZ Flash 3 的說明。 9.
9.
9.4 華碩 SPD 信息(ASUS SPD Information) 本菜單顯存插槽的相關信息。 9.
9.6 華碩 Armoury Crate 本項目用來讓您在 Windows® 作業系統中開啟或關閉 Armoury Crate 應用程序的下 載與安裝。Armoury Crate 應用程序可以幫助您管理與下載主板最新的驅動程序與應 用程序。 Download & Install ARMOURY CRATE app 設置值有:[Disabled] [Enabled] 9.
10. 退出 BIOS 程序(Exit menu) 本菜單可讓您讀取 BIOS 程序出廠默認值與退出 BIOS 程序,並可保存與取消對 BIOS 項目的更改。你也可以由 Exit 菜單進入 EZ Mode。 Load Optimized Defaults 本項目可讓您載入 BIOS 程序設置菜單中每個參數的默認值。當您選擇本項目或按下 ,便會出現一個確認對話窗口,選擇 OK 以載入默認值。. Save Changes & Reset 當您完成對 BIOS 設置程序所做的更改後,請選擇本項目或按下 ,將會出現一 個確認對話窗口,請選擇 OK 以保存設置並退出 BIOS 設置程序。 Discard Changes & Exit 本項目可讓您放棄所做的更改,並恢復原先保存的設置。在選擇本項目或按下 鍵後,將會出現一個確認對話窗口,請選擇 Yes 以放棄任何設置並載入原先保存的 設置,同時退出 BIOS 設置程序。 Launch EFI Shell from filesystem device 本項目可以讓您由含有數據系統的設備中啟動 EFI Shell(shellx64.
11. 更新 BIOS 程序(Updating BIOS) 華碩網站上提供有最新的 BIOS 程序,可以強化系統的穩定度、兼容性或運行性能, 但是運行 BIOS 程序更新是具有潛在性風險的,若是使用現有版本的 BIOS 程序都沒 有發生問題時,請勿手動運行更新 BIOS 程序。不適當的 BIOS 程序更新可能會導致 系統啟動失敗。若有需要,請使用以下各節的方法來更新您的 BIOS 程序。 請訪問華碩網站(https://w3.asus.com.cn)來下載本主板最新的 BIOS 程序。 下列應用程序可讓您管理或更新主板的 BIOS 設置程序: 1. ASUS EZ Flash 3:使用 U 盤來更新 BIOS。 2. ASUS CrashFree BIOS 3:當 BIOS 文件遺失或丟失時,可以使用 U 盤或主板 的驅動程序與應用程序光盤來更新 BIOS。 11.1 華碩 EZ Flash 3(ASUS EZ Flash 3) 華碩 EZ Flash 3 程序讓您能輕鬆地更新 BIOS 程序,可以不必再到作業系統模式下 運行。 請依照以下步驟通過更新 BIOS 程序: 1.
11.2 華碩 CrashFree BIOS 3(ASUS CrashFree BIOS 3) 華碩最新自行研發的 CrashFree BIOS 3 工具程序,讓您在當 BIOS 程序和數據被病 毒入侵或丟失時,可以輕鬆的從驅動程序及應用程序光盤,或是從含有最新或原始的 BIOS 文件的 U 盤中恢復 BIOS 程序的數據。 在驅動程序及應用程序光盤中的 BIOS 程序版本可能會比官方網站上的BIOS 程序版 本舊,若是想要使用更新的 BIOS 程序,請至 http://support.asus.com 網站下載, 並保存在便攜存儲設備中。 恢復 BIOS 程序 請依照下列步驟使用應用程序光盤恢復 BIOS 程序: 1. 啟動系統。 2. 將主板的應用程序光盤放入光驅,或是將含有最新或原始的 BIOS 文件的U 盤 插入 USB 連接端口。 3. 接著工具程序便會自動檢查光盤或存儲設備中是否存有 BIOS 文件。當搜索到 BIOS 文件後,工具程序會開始讀取 BIOS 文件並自動進入 ASUS EZ Flash 3 程 序。 4.