Motherboard PRIME H310T PRIME H310T/CSM
E14094 First Edition April 2018 Copyright © 2018 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Safety information....................................................................................................... iv About this guide.......................................................................................................... iv Package contents........................................................................................................ vi PRIME H310T specifications summary.....................................................................
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Package contents Check your motherboard package for the following items. Motherboard ASUS PRIME H310T motherboard Cables 2 x Serial ATA 6.0 Gb/s cables 1 x SATA power cable Accessories 1 x I/O Shield 1 x Thin Mini ITX I/O Shield 2 x M.2 screw packages Application DVD Support DVD Documentation User Guide If any of the above items is damaged or missing, contact your retailer.
PRIME H310T specifications summary USB Intel® H310 Chipset - 4 x USB 3.1 Gen1 ports (2 ports at mid-board, 2 ports at back-panel) - 4 x USB 2.0 ports (2 ports at mid-board, 2 ports at back-panel) GL852G USB Hub - 3 x USB 2.
PRIME H310T specifications summary 1 x COM header Internal I/O connectors 1 x Clear CMOS jumper (2-pin) 1 x TPM header 1 x SATA power connector 1 x Speaker connector Connectors for AIO System 1 x 2-pin internal DC power connector 1 x Stereo speaker connector 1 x DMIC header Connectors for Flat Panel Display 1 x Backlight inverter voltage selection header 1 x FPD brightness header 1 x Panel voltage selection header 1 x Panel off header BIOS features 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.0, WfM 2.
1 Product introduction Motherboard overview • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply.
Serial port connector (10-1 pin COM) Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors.
LCD panel monitor switch header (2-pin PANEL_SW) This 2-pin header is for connecting a monitor switch that can turn off the LCD panel display backlight. System panel connector (10-1 pin F_PANEL) This connector supports several chassis-mounted functions. LVDS connector This connector is for an LCD monitor that supports Low-voltage Differential Signaling (LVDS) interface. Flat panel display brightness connector (8-pin LCD_BLKT_PANEL) This connector is for the LCD panel backlight and brightness controls.
4. Hold down the key during the boot process and enter BIOS setup to re-enter data. If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. Internal stereo speaker header (4-pin SPK_OUT) The internal mono speaker header allows connection to an internal, low-power speaker for basic system sound capability. The subsystem is capable of driving a speaker load of 4 Ohms at 3 Watts (rms).
Rear panel connectors 1 1. 2 3 4 5 6 7 8 DC power connector. Insert the power adapter into this port. • It can support both 19V and 12V DC input. • The power adapter is purchased separately. • Use the appropriate DC power adapter for the following scenarios: - Use a 90W adapter when a 35W CPU is installed on the system. - Use a 120W adapter when using your system with an LVDS panel.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. 6. LAN port LED indications Activity/Link LED Description Status Speed LED Description Status Off Orange Orange (Blinking) Orange (Blinking then steady) OFF ORANGE GREEN No link Linked Data activity Ready to wake up from S5 mode Activity Link LED Speed LED 10Mbps connection 100Mbps connection 1Gbps connection LAN port 7. Line Out port (lime). This port connects to a headphone or a speaker.
Central Processing Unit (CPU) This motherboard comes with a surface mount LGA1151 socket designed for 8th Generation Intel® Core™ i7 / i5 / i3, Pentium®, and Celeron® processors. Unplug all power cables before installing the CPU. • Ensure that you install the correct CPU designed for the LGA1151 socket only. DO NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the LGA1151 socket.
System memory Overview This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual Inline Memory Module (SO-DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets: DIMM_B1 DIMM_A1 Channel Sockets Channel A DIMM_A1 Channel B DIMM_B1 • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.
BIOS information 2 Scan the QR code to view the BIOS update guide. The system will automatically active ASUS Self-Recovering BIOS after reboot from the BIOS update failure. ASUS Self-Recovering BIOS ASUS-exclusive BIOS protection technology automatically recovers the system’s BIOS with a verified backup in the event of an update failure, preventing the need to replace or reinstall your hardware.
• The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website at www.asus.com to download the latest BIOS file for this motherboard. • If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey F5.
Event Log You can access Event Log from the Tool menu. Main Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Ai Tweaker Advanced Monitor Boot Tool Exit ASUS EZ Flash 3 Utility ASUS User profile ASUS SPD Information Event Log Event Log :Select Screen : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save & Exit ESC: Exit Version 2.19.1269 Copyright (C) 2018 American Megatrends, Inc.
Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Main Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Ai Tweaker Advanced Monitor Boot Tool Exit Load Optimized Defaults Save Changes & Reset Discard Changes & Exit Launch EFI Shell from USB drives Exit system setup without saving any changes. :Select Screen : Select Item Enter: Select +/-: Change Opt.
Appendix Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com +86-21-38429911 +86-21-5866-8722, ext. 9101# http://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (America) Address 800 Corporate Way, Fremont, CA 94539, USA Telephone +1-510-739-3777 Fax +1-510-608-4555 Web site http://www.asus.
FCC COMPLIANCE INFROMATION Per FCC Part 2 Section 2.1077 Responsible Party: Address: Phone/Fax No: Asus Computer International 800 Corporate Way, Fremont, CA 94539. (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : PRIME H310T compliance statement: This device complies with part 15 of the FCC Rules.
