User’s Manual
1-2
Chapter 1: Product introduction
1.2.1 Layout contents
1. CPU socket
The motherboard comes with a surface mount Intel
®
SocketLGA1200designedfor10
th
Gen
Intel
®
Core
TM
,Pentium
®
Gold and Celeron
®
Processors.
Formoredetails,refertoCentral Processing Unit (CPU).
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
Formoredetails,refertoSystem memory.
3. Expansion slots
ThismotherboardsupportstwoPCIe3.0x16graphicscardandtwoPCIe3.0x1network
cards,SCSIcardsandothercardsthatcomplywiththePCIExpressspecications.
Slot Description Single VGA Dual VGA
PCIe 3.0 x16_1 x16(RecommendedforsingleVGAcard) x16
PCIe 3.0 x16_2 - x4
• InsingleVGAcardmode,usethePCIE3.0x16_1slot(gray)foraPCIex16graphics
card to get better performance.
• WerecommendthatyouprovidesufcientpowerwhenrunningCrossFireX™mode.
• ConnectachassisfantothemotherboardconnectorlabeledCHA_FAN1/2/3when
usingmultiplegraphicscardsforabetterthermalenvironment.
4. Fan headers
The fan headers allow you to connect fans or pumps to cool the
system.
5. Power connectors
ThesePowerconnectorsallowyoutoconnectyourmotherboardtoapowersupply.The
powersupplyplugsaredesignedtotinonlyoneorientation.Findtheproperorientationand
pushdownrmlyuntilthepowersupplyplugsarefullyinserted.
Ensuretoconnectthe8-pinpowerplug.
• Forafullyconguredsystem,werecommendthatyouuseapowersupplyunit
(PSU)thatcomplieswithATX12VSpecication2.0(orlaterversions)andprovidesa
minimumpowerof350W.
• WerecommendthatyouuseaPSUwithahigherpoweroutputwhenconguringa
systemwithmorepower-consumingdevices.Thesystemmaybecomeunstableor
may not boot up if the power is inadequate.
• Ifyouareuncertainabouttheminimumpowersupplyrequirementforyoursystem,we
recommendyoutorefertoonlineresourcesforPowerSupplyWattageCalculator.
FAN PWM
FAN IN
FAN PWR
GND
FAN PWM
FAN IN
FAN PWR
GND