User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
10
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
3 Q-Fan Control
The Q-Fan Control allows you to set a fan prole or manually congure the operating speed
of your CPU and chassis fans. Click Qfan Control(F6) or press the <F6> hotkey for the
Q-Fan settings.
Click to select a fan to be configured
Click to undo the changes
Click to apply the fan setting
Click to go back to main menu
Select a profile to apply to your fan
Select a mode to apply to your fan
Select to manually configure your fans
Configuring fans manually
Select Manual from the list of proles to manually congure your fans’ operating speed.
Speed points Select to manually configure your fans
To congure your fans:
1. Select the fan that you want to congure and to view its current status.
2. Click and drag the speed points to adjust the fans’ operating speed.
3. Click Apply to save the changes, then click Exit (ESC).