User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
17
DRAM Refresh Interval
Conguration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time
Conguration options: [Auto] [1] – [31]
DRAM READ to PRE Time
Conguration options: [Auto] [1] – [15]
DRAM FOUR ACT WIN Time
Conguration options: [Auto] [1] – [63]
DRAM WRITE to READ Delay / DRAM WRITE to READ Delay L /
DRAM WRITE to READ Delay S
Conguration options: [Auto] [1] – [15]
DRAM CKE Minimum Pulse Width
Conguration options: [Auto] [0] – [15]
DRAM Write Latency
Conguration options: [Auto] [1] – [31]
Skew Control
ODT RTT WR (CHA) / ODT RTT WR (CHB)
Conguration options: [Auto] [0 DRAM Clock] [80 DRAM Clock]
[120 DRAM Clock] [240 DRAM Clock] [255 DRAM Clock]
ODT RTT PARK (CHA) / ODT RTT NOM (CHA) / ODT RTT PARK (CHB) /
ODT RTT NOM (CHB)
Conguration options: [Auto] [0 DRAM Clock] [34 DRAM Clock]
[40 DRAM Clock] [48 DRAM Clock] [60 DRAM Clock]
[80 DRAM Clock] [120 DRAM Clock] [240 DRAM Clock]
ODT_READ_DURATION / ODT_READ_DELAY / ODT_WRITE_DURATION /
ODT_WRITE_DELAY
Conguration options: [Auto] [0] – [7]
Data Rising Slope / Cmd Rising Slope / Ctl Rising Slope / Clk Rising Slope /
Data Falling Slope / Cmd Falling Slope / Ctl Falling Slope / Clk Falling Slope
Conguration options: [Auto] [0] – [15]
Data Rising Slope Offset / Cmd Rising Slope Offset /
Ctl Rising Slope Offset / Clk Rising Slope Offset /
Data Falling Slope Offset / Cmd Falling Slope Offset /
Ctl Falling Slope Offset / Clk Falling Slope Offset
Conguration options: [Auto] [0] [1]
RTL IOL Control
DRAM RTL INIT value
Conguration options: [Auto] [0] – [127]
DRAM IOL INIT value(CHA) / DRAM IOL INIT value(CHB)
Conguration options: [Auto] [0] – [15]