User Manual

PRIME / TUF GAMING Intel

500 Series BIOS Manual

The following items appear only when you set Overclocking TVB to [Enabled].

1(~6)-Core Active

Conguration options: [Auto] [Enabled]

The following items appear only when you set 1(~6)-Core Active to [Enabled].

Temperature A

Package passing this temparature threshold will engage the negative ratio offset

specied in Negative Ratio Offset A. The unit of measurement for this item is Degree

Celcius. Use the <+> or <-> keys to adjust the value, or key in [Auto] and press the

<Enter> key to apply the optimized setting. Conguration options: [Auto] [1] – [115]

Negative Ratio Offset A

This will be the potential negative offset to respective ratio when package

temperature rises above threshold specied in Temperature A.

Conguration options: [Auto] [User Specify]

The following item appears only when you set Negative Ratio Offset A to [User Specify].

Ratio Offset

Use the <+> or <-> to adjust the value. Conguration options: [0] – [31]

Temperature B for additional -1x Ratio

This can be the second additional temperature threshold which when exceeded, will

stack an additional -1x ratio offset to the setting in “Negative Ratio Offset A”. This

item should logically be higher than Temperature A.

Conguration options: [Auto] [1] – [115]

Tweaker’s Paradise

The sub-items in this menu allow you to set the Tweaker’s Paradise features. Use the <+>

or <-> keys to adjust the value, or key in [Auto] and press the <Enter> key to apply the

optimized setting for the sub-items below.

Realtime Memory Timing

Allows you to enable or disable realtime memory timings. When set to [Enabled], the

system will allow performing realtime memory timing changes after MRC_DONE.

Conguration options: [Disabled] [Enabled]

FCLK Frequency for Early Power On

Conguration options: [Normal (800Mhz)] [1GHz] [400MHz] [Auto]

VPPDDR Voltage

Conguration options: [Auto] [2.5V] [2.6V] [2.7V] [2.8V]

Internal PLL Voltage

Allows you to congure the offset for the Core PLL VCC Trim.

Conguration options: [Auto] [0.900] – [1.845]

GT PLL Voltage

Allows you to congure the offset for the GT PLL VCC Trim.

Conguration options: [Auto] [0.900] – [1.845]