User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
29
The following item appears only when you set PCI Express Native Power Management
to [Enabled].
Native ASPM
Conguration options: [Auto] [Enabled] [Disabled]
[Enabled]: OS Controlled ASPM.
[Disabled]: BIOS Controlled ASPM.
PCH - PCI Express
DMI Link ASPM Control
Allows you to set the ASPM level of the DMI link.
Conguration options: [Disabled] [L0s] [L1] [L0sL1] [Auto]
ASPM
Allows you to set the ASPM level.
Conguration options: [Disabled] [L0s] [L1] [L0sL1] [Auto]
[Disabled]: Disables ASPM.
[L0s]: Forces all links to the L0s state.
[L1]: Forces all links to the L1 state.
[L0sL1]: Forces all links to the L0sL1 state.
[Auto]: BIOS auto congure.
L1 Substates
Allows you to congure the PCI Express L1 Substates settings.
Conguration options: [Disabled] [L1.1] [L1.1 & L1.2]
SA - PCI Express
DMI Link ASPM Control
Allows you to set the ASPM level on SA side of the DMI link. Conguration options:
[Disabled] [L0s] [L1] [L0sL1]
DMI Gen3 ASPM Control
Allows you to set the level of DMI Gen3 ASPM Control support.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
L0s is not supported for DMI ASPM for CML/TGP.
DMI Gen3 ASPM
Allows you to set the level of DMI Gen3 ASPM support.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
L0s is not supported for DMI ASPM for CML/TGP.
PEG - ASPM
Allows you to set the level of the ASPM support for the PEG0. This item will have no effect if
PEG is not the currently active device.
Conguration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]