User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
40
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
7.12 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and congure onboard
devices.
The items in this menu may vary by motherboard models.
PCIe Bandwidth Bifurcation Configuration
Conguration options: [Auto] [X8/X8] [PCIe RAID mode]
[Auto] Runs full PCIe X16 mode.
[X8/X8] PCIEX16_1 runs X8/X8 mode.
[PCIe RAID mode] Up to three SSDs installed onto the Hyper M.2 X16 series card
can be detected.
HD Audio
Allows you to enable or disable the HD-Audio (HDA) device.
Conguration options: [Disabled] [Enabled]
[Disabled] HDA will be unconditionally disabled.
[Enabled] HDA will be unconditionally enabled.
Intel LAN
Allows you to enable or disable Intel LAN. Conguration options: [Disabled] [Enabled]
The following item appears only when you set Intel LAN to [Enabled].
Intel LAN PXE Option ROM
Allows you to enable or disable Intel LAN PXE OPROM.
Conguration options: [Disabled] [Enabled]