User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
43
Power On By PCI-E
Allows you to enable or disable the wake-on-LAN function of the onboard LAN controller or
other installed PCI-E LAN cards. Conguration options: [Disabled] [Enabled]
Power On By RTC
Allows you to enable or disable Real-Time Clock (RTC) to generate a wake event and
congure the RTC alarm date. When this item is set to [Enabled], you can set the days,
hours, minutes, or seconds to schedule an RTC alarm date either using the <+> or <-> keys
or by entering a number directly within the valid input range.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set Power On By RTC to [Enabled].
RTC Alarm Date (Days)
Allows you to set the days of RTC alarm. [0] represents “Every Day”.
Conguration options: [0] – [31]
- Hour
Conguration options: [0] – [23]
- Minute
Conguration options: [0] – [59]
- Second
Conguration options: [0] – [59]
7.14 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
Device
Allows you to select a device and displays its SMART information. If no HDD/SSD device is
detected on the motherboard, the eld shows [N/A].