User Manual
Table Of Contents
- 1 Knowing BIOS
- 2 BIOS Setup program
- 3 Q-Fan Control
- 4 My Favorites menu
- 5 Main menu
- 6 Ai Tweaker menu
- 7 Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor menu
- 9 Boot menu
- 10 Tool menu
- 11 Exit menu
- 12 Updating BIOS
PRIME / TUF GAMING Intel
®
500 Series BIOS Manual
49
Chassis Fan 1(~3) Max. Duty Cycle (%)
Allow you to set the maximum fan duty cycle and the source temperature
upper limit. When the source temperature reaches the upper limit, chassis
fans will operate at the maximum duty cycle. Conguration options: [0] – [100]
Chassis Fan 1(~3) Middle Temperature
Allow you to set the middle temperature. Chassis fans will operate at the
middle duty cycle when the source temperature is higher than the limit.
Conguration options: [0] – [100]
Chassis Fan 1(~3) Middle Duty Cycle (%)
Allow you to set the middle fan duty cycle and the source temperature upper
limit. When the source temperature reaches the middle limit, chassis fans will
operate at the middle duty cycle. Conguration options: [0] – [100]
Chassis Fan 1(~3) Lower Temperature
Allow you to set the lower temperature. Chassis fans will operate at the
minimum duty cycle when the source temperature is lower than the limit.
Conguration options: [0] – [100]
Chassis Fan 1(~3) Min Duty Cycle (%)
Allow you to set the minimum fan duty cycle. When the temperature is lower
than the lower limit, chassis fans will operate at the minimum duty cycle.
Conguration options: [0] – [100]
AIO PUMP Control
Allows you to set AIO Pump fan control mode.
Conguration options: [Auto Detect] [DC Mode] [PWM Mode]
[Auto Detect] Detects the type of AIO Pump fan installed and automatically
switches the control modes.
[DC Mode] Enables the Q-Fan control in DC mode for 3-pin fan.
[PWM Mode] Enables the Q-Fan control in PWM mode for 4-pin fan.
AIO PUMP Profile
Allows you to select the appropriate performance level for AIO Pump fan.
Conguration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
If AIO PUMP Profile is set to [Manual], we suggest raising your fan/pump duty to 100% if
your CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due
to overheating with inefcient fan/pump duty.
The following items will not appear if you set AIO PUMP Profile to [Full Speed].
AIO PUMP Fan Q-Fan Source
AIO Pump fan will be controlled according to the selected temperature source.
Conguration options: [CPU] [MotherBoard] [VRM] [Chipset] [Multiple Sources]
The following items appear only when you set [AIO PUMP Fan Q-Fan Source] to [Multiple
Sources].
Temperature Source 1(~3)
These items allow you to select up to three temperature sources and AIO
Pump fan will automatically change based on the highest temperature.
Conguration options: [CPU] [MotherBoard] [VRM] [Chipset] [N/A]