User Manual
Table Of Contents
- 1 UEFIとは
- 2 UEFI BIOS Utility
- 3 Q-Fan Control
- 4 My Favorites
- 5 Main
- 6 Ai Tweaker
- 7 Advanced
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 Thunderbolt(TM) Configuration
- 7.8 PCI Subsystem Settings
- 7.9 USB Configuration
- 7.10 Network Stack Configuration
- 7.11 NVMe Configuration
- 7.12 Onboard Devices Configuration
- 7.13 APM Configuration
- 7.14 HDD/SSD SMART Information
- 8 Monitor
- 9 Boot
- 10 Tool
- 11 Exit
- 12 UEFI BIOSの更新
PRIME / TUF GAMING Intel® 500 Series BIOSマニュアル
19
Write Drive Strength/Equalization 2D*
設 定オプション: [Auto] [Disabled] [Enabled]
Write Slew Rate Training*
設 定オプション: [Auto] [Disabled] [Enabled]
Read ODT Training*
設 定オプション: [Auto] [Disabled] [Enabled]
Read Equalization Training*
設 定オプション: [Auto] [Disabled] [Enabled]
Read Amplifier Training*
設 定オプション: [Auto] [Disabled] [Enabled]
Write Timing Centering 2D
設 定オプション: [Auto] [Disabled] [Enabled]
Read Timing Centering 2D
設 定オプション: [Auto] [Disabled] [Enabled]
Command Voltage Centering
設 定オプション: [Auto] [Disabled] [Enabled]
Write Voltage Centering 2D
設 定オプション: [Auto] [Disabled] [Enabled]
Read Voltage Centering 2D
設 定オプション: [Auto] [Disabled] [Enabled]
Late Command Training
設 定オプション: [Disabled] [Enabled] [Auto]
Round Trip Latency
設 定オプション: [Auto] [Disabled] [Enabled]
Turn Around Timing Training
設 定オプション: [Disabled] [Enabled]
Rank Margin Tool
設 定オプション: [Disabled] [Enabled] [Minimal] [Auto]
Rank Margin Tool Per Bit
設 定オプション: [Disabled] [Enabled]
Margin Check Limit
設 定オプション: [Disabled] [L1] [L2] [Both]
次 の 項 目 は「 Margin Check Limit」を［ L2］ま た は［ Both］に設定した場合にのみアクセスす
ることがで きま す。
Margin Limit Check L2
設 定オプション: [1] – [300]
Memory Test
設 定オプション: [Disabled] [Enabled]