User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
31
Configure Memory Dynamic Frequency Switching
The following item appears only when Realtime Memory Frequency is set to [Disabled].
Dynamic Memory Boost
Allows you to enable or disable Dynamic Memory Boost Feature. Allows automatic
switching between default SPD Profile frequency and selected XMP profile frequency.
Only valid if an XMP Profile is selected.
Configuration options: [Disabled] [Enabled]
The following item appears only when Dynamic Memory Boost is set to [Disabled].
Realtime Memory Frequency
Allows you to enable or disable Memory Frequency feature. Allows manual switching
between in runtime between default SPD Profile frequency and selected XMP profile
frequency. Only valid if an XMP Profile is selected.
Configuration options: [Disabled] [Enabled]
SA GV
System Agent Geyserville. Can disable, fix to a specific point, or enable frequency
switching. If enabled, we recommend you to leave options at parked values for best
compatibility. Enabling this feature requires a longer boot time.
Configuration options: [Disabled] [Enabled] [Fixed to 1st Point] [Fixed to 2nd Point]
[Fixed to 3rd Point] [Fixed to 4th Point]
The following items appear only when SA GV is set to [Enabled], [Fixed to 1st Point],
[Fixed to 2nd Point], [Fixed to 3rd Point], or [Fixed to 4th Point].
First Point Frequency
Allows you to specify the frequency for the given point. 0-MRC auto, else a specific
frequency as an integer: 2000Mhz.
Configuration options: [0] - [65535]
First Point Gear
Allows you to set the gear ratio for this SAGV point. 0-Auto, 1-G1, 2-G2, 4-G4.
Configuration options: [0] - [4]
Second Point Frequency
Allows you to specify the frequency for the given point. 0-MRC auto, else a specific
frequency as an integer: 2000Mhz.
Configuration options: [0] - [65535]
Second Point Gear
Allows you to set the gear ratio for this SAGV point. 0-Auto, 1-G1, 2-G2, 4-G4.
Configuration options: [0] - [4]
Third Point Frequency
Allows you to specify the frequency for the given point. 0-MRC auto, else a specific
frequency as an integer: 2000Mhz.
Configuration options: [0] - [65535]
Third Point Gear
Allows you to set the gear ratio for this SAGV point. 0-Auto, 1-G1, 2-G2, 4-G4.
Configuration options: [0] - [4]
The Fourth Point Gear will always be the settings you set in the main menu, so configure
the Fourth Point Gear there.