User Manual

PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
37
SA CEP Enable
Allows you to enable or disable SA CEP (Current Excursion Protection) Support. Uses
pCode Mailbox Command 0x37, Sub-command 0x1. Set Databit3 to 1.
Configuration options: [Auto] [Disabled] [Enabled]
IA SoC Iccmax Reactive Protector
Configuration options: [Auto] [Disabled] [Enabled]
Inverse Temperature Dependency Throttle
Configuration options: [Auto] [Disabled] [Enabled]
IA VR Voltage Limit
Voltage Limit (VMAX). This value represents the Maximum instantaneous voltage
allowed at any given time. Range is 0 - 7999mV. Uses BIOS VR mailbox command
0x8.
Configuration options: [Auto] [0] - [7999]
Thermal Velocity Boost
TVB Voltage Optimizations
This service controls thermal based voltage optimizations for processors that
implement the Intel Thermal Velocity Boost (TVB) feature. This item is set to
[Enabled] by default. Uses Overclocking Mailbox command 0x18/0x19.
Configuration options: [Auto] [Disabled] [Enabled]
V-Max Stress
If set to [Enabled], Frequency may be clipped if the max voltage on the silicon is too
high. Frequency will not be clipped if disabled.
Configuration options: [Auto] [Disabled] [Enabled]
Overclocking TVB
Enable this to be able to draw temperature/frequency dependencies.
Configuration options: [Auto] [Disabled] [Enabled] [+1Boost Profile] [+2Boost Profile]
+1Boost Profile(K CPU):
This setting will enable additional boost of one bin with the help of Auto Optimized
Temperature Control.
+2Boost Profile(K CPU):
This setting will enable additional boost of two bins with the help of Auto Optimized
Temperature Control.
The following items appear only when Overclocking TVB is set to [Enabled].
1-Core Active / 2-Core Active / 3-Core Active / 4-Core Active / 5-Core Active /
6-Core Active
Configuration options: [Auto] [Enabled]