User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
40
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
Memory Controller PLL Voltage
Allows you to configure the offset for the Memory Controller PLL VCC Trim. The
values range from 0.900V to 1.845V with an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
CPU 1.8V Small Rail
Allows you to configure the voltage for the CPU 1.8V Small Rail. The values range
from 1.500V to 2.300V with an interval of 0.010V.
Configuration options: [Auto] [1.50000] - [2.30000]
PLL Termination Voltage
Allows you to configure the voltage for the PLL Termination. The values range from
0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000V] - [1.80000V]
CPU Standby Voltage
Allows you to configure the voltage for the CPU Standby. The values range from
0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.80000]
PCH 1.05V Voltage
Allows you to configure the voltage for the PCH 1.05V. The values range from 0.800V
to 1.600V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.60000]
PCH 0.82V Voltage
Allows you to configure the voltage for the PCH 0.82V. The values range from 0.700V
to 1.300V with an interval of 0.010V.
Configuration options: [Auto] [0.70000] - [1.30000]
CPU Input Voltage Reset Voltage
Allows you to configure the voltage for the CPU Input when reset. The values range
from 1.500V to 2.100V with an interval of 0.010V.
Configuration options: [Auto] [1.50000] - [2.10000]
AI Features
The items in this menu allows you to enable or disable different AI Features.
Package Temperature Threshold
Frequency will adjust to stay below this package temperature threshold when
regulation is enabled.
Configuration options: [Auto] [30] - [115]
Regulate Frequency by above Threshold
Frequency will adjust to stay below the Package Temperature Threshold when this
item is enabled. SVID must be enabled for this to work.
Configuration options: [Auto] [Enabled] [Disabled]
Cooler Efficiency Customize
[Keep Training] Continuous evaluations will be performed on Cooler efficiency
and updated accordingly.
[Stop Training] Cooler efficiency evaluations will stop and current evaluated
efficiency will be used.
[User Specify] Manually specify the Cooler efficiency and all predictions will be
based off this manual setting.