User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
46
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
Memory VDDQ Switching Frequency
Allows you to set the switching frequency of memory VDDQ regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
Memory VPP Switching Frequency
Allows you to set the switching frequency of memory VPP regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
Memory Current Capability
Allows you to set the current capability for the switching regulators in Amps. Use
the <+> or <-> to adjust the value. The values range from 0.125A to 6.000A with an
interval of 0.125A.
Configuration options: [Auto] [0.12500] - [6.00000]
The following items appear only when PMIC Voltages is set to [By per PMIC].
PMIC0-3 SPD HUB VLDO (1.8V)
Allows you to set the main power for the SPD Hub Logic. Default set to 1.8V. Use
the <+> or <-> to adjust the value. The values range from 1.700V to 2.000V with an
interval of 0.100V.
Configuration options: [Auto] [1.70000] - [2.00000]
PMIC0-3 SPD HUB VDDIO (1.0V)
Allows you to set the main power for the SPD Hub side-band interface. Default set to
1.0V. Use the <+> or <-> to adjust the value. The values range from 0.900V to 1.200V
with an interval of 0.100V.
Configuration options: [Auto] [0.90000] - [1.20000]
PMIC0-3 Memory VDD Voltage
Allows you to set the power for the DRAM IC’s VDD portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
PMIC0-3 Memory VDDQ Voltage
Allows you to set the power for the DRAM IC’s Data portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
PMIC0-3 Memory VPP Voltage
Allows you to set the power for the DRAM Activating Power Supply. Use the <+> or
<-> to adjust the value. The values range from 1.500V to 2.135V with an interval of
0.005V.
Configuration options: [Auto] [1.50000] - [2.13500]
PMIC0-3 Memory VDD Switching Frequency
Allows you to set the switching frequency of memory VDD regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]