User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
52
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
Intel(R) SpeedStep(tm)
Allows more than two frequency to be supported.
Configuration options: [Disabled] [Enabled]
Intel(R) Speed Shift Technology
Allows you to disable or enable Intel(R) Speed Shift Technology support. When
enabled, CPPC v2 interface allows hardware controlled P-states.
Configuration options: [Disabled] [Enabled]
Intel(R) Turbo Boost Max Technology 3.0
Allows you to disable or enable Intel(R) Turbo Boost Max Technology 3.0 support.
Disabling will report the maximum ratio of the slowest core in _CPC object.
Configuration options: [Disabled] [Enabled]
Turbo Mode
Allows you to automatically set the CPU cores to run faster than the base operating
frequency when it is below the operating power, current and temperature specification
limit. (Requires EMTTM enabled too)
Configuration options: [Disabled] [Enabled]
Acoustic Noise Settings
The items in this submenu allow you to configure Acoustic Noise Settings for IA, GT,
and SA domains.
Acoustic Noise Settings
Acoustic Noise Mitigation
Enabling this option will help mitigate acoustic noise on certain SKUs when the CPU is in
deeper C state.
Configuration options: [Disabled] [Enabled]
The following items appear only when Acoustic Noise Mitigation is set to [Enabled].
Pre Wake Time
Allows you to set the maximum Pre Wake randomization time in micro ticks. This is for
acoustic noise mitigation Dynamic Periodicity Alteration (DPA) tuning. Use the <+> or <->
to adjust the value.
Configuration options: [0] - [255]
Ramp Up Time
Allows you to set the maximum Ramp Up randomization time in micro ticks. This is for
acoustic noise mitigation Dynamic Periodicity Alteration (DPA) tuning. Use the <+> or <->
to adjust the value.
Configuration options: [0] - [255]
Ramp Down Time
Allows you to set the maximum Ramp Down randomization time in micro ticks. This is for
acoustic noise mitigation Dynamic Periodicity Alteration (DPA) tuning. Use the <+> or <->
to adjust the value.
Configuration options: [0] - [255]
IA VR Domain
Disable Fast PKG C State Ramp for IA Domain
This option needs to be configured to reduce acoustic noise during deeper C states.
[FALSE] Don’t disable Fast ramp during deeper C states.
[TRUE] Disable Fast ramp during deeper C state.