User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
53
Slow Slew Rate for IA Domain
Set VR IA Slow Slew Rate for Deep Package C State ramp time; Slow slew rate equals
to Fast divided by number, the number is 2, 4, 8 to slow down the slew rate to help
minimize acoustic noise.
Configuration options: [Fast/2] [Fast/4] [Fast/8]
GT VR Domain
Disable Fast PKG C State Ramp for GT Domain
This option needs to be configured to reduce acoustic noise during deeper C states.
[FALSE] Don’t disable Fast ramp during deeper C states.
[TRUE] Disable Fast ramp during deeper C state.
Slow Slew Rate for GT Domain
Set VR GT Slow Slew Rate for Deep Package C State ramp time; Slow slew rate equals
to Fast divided by number, the number is 2, 4, 8 to slow down the slew rate to help
minimize acoustic noise.
Configuration options: [Fast/2] [Fast/4] [Fast/8]
CPU C-states
Allows you to enable or disable CPU Power Management. Allows CPU to go to C
states when it’s not 100% utilized.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when CPU C-states is set to [Enabled].
Enhanced C-States
Allows you to enable or disable C1E. When enabled, CPU will switch to minimum
speed when all cores enter C-State.
Configuration options: [Enabled] [Disabled]
Package C State Limit
Allows you to set the C-state limit for the CPU package. Setting to [CPU Default]
will leave it as the Factory default value. Setting to [Auto] will initialize the deepest
available Package C State Limit.
Configuration options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [C8] [C9] [C10] [CPU Default]
[Auto]
Thermal Monitor
Allows you to enable or disable the Thermal Monitor.
Configuration options: [Disabled] [Enabled]
Dual Tau Boost
Allows you to enable Dual Tau Boost feature. This is only applicable for CMLS
35W/65W/125W sku. When DPTF is enabled this feature is ignored.
Configuration options: [Disabled] [Enabled]