User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. My Favorites
- 4. Main menu
- 5. Ai Tweaker menu
- 6. Advanced menu
- 6.1 Platform Misc Configuration
- 6.2 CPU Configuration
- 6.3 System Agent (SA) Configuration
- 6.4 PCH Configuration
- 6.5 PCH Storage Configuration
- 6.6 PCH-FW Configuration
- 6.7 Thunderbolt(TM) Configuration
- 6.8 PCI Subsystem Settings
- 6.9 USB Configuration
- 6.10 Network Stack Configuration
- 6.11 NVMe Configuration
- 6.12 HDD/SSD SMART Information
- 6.13 APM Configuration
- 6.14 Onboard Devices Configuration
- 6.15 Intel(R) Rapid Storage Technology
- 7. Monitor menu
- 8. Boot menu
- 9. Tool menu
- 10. Exit menu
- 11. Updating BIOS
54
PRIME / ProArt / TUF GAMING Intel 600 Series BIOS Manual
6.3 System Agent (SA) Configuration
The items in this menu allow you to change the System Agent (SA) parameters.
VT-d
Allows you to enable virtualization technology function on memory control hub.
Configuration options: [Enabled] [Disabled]
The following item appears only when VT-d is set to [Enabled].
Control Iommu Pre-boot Behavior
Allows you to enable IOMMU in Pre-boot environment (if DMAR table is installed in DXE and
if VTD_INFO_PPI is installed in PEI).
Configuration options: [Disable IOMMU] [Enable IOMMU during boot]
Memory Configuration
The items in this submenu allow you to set memory configuration parameters.
Memory Remap
Allows you to enable or disable memory remap above 4GB.
Configuration options: [Enabled] [Disabled]
Graphics Configuration
The items in this submenu allow you to select a primary display from CPU Graphics, PEG
Graphics devices, or PCIe Graphics devices.
Primary Display
Allows you to select the primary display from CPU Graphics / PEG Graphics / PCIe
Graphics device.
Configuration options: [Auto] [CPU Graphics] [PEG Slot] [PCIE]
iGPU Multi-Monitor
Set this item to [Enabled] to empower both integrated and discrete graphics for multi-
monitor output. iGPU shared system memory size will be fixed at 64M.
Configuration options: [Disabled] [Enabled]